Recent content by boston617b

Best answer selected by boston617b.

yeah, nothing is working, maybe I just cant push this cpu on this board, who knows. I will be looking into another cpu

I can put memory clock at 667, is that fine? the next lowest is 533. But I will try anyways, thanks

@truegenius Sorry I havent replied cause I have been swamped with work these past few days, Idont know why but I just got the email notification an hour ago even though you sent it on the 5th. Anyways, I will gather the info and reply back tomorrow

Ok here is what happened. I downloaded and installed ntune but it froze my desktop when I opened it. So I. Restarted and set the memory like you said but ddr2 voltage options have only 1.8, 1.85, 1.9, and 1.95. So I set to 1.85. Saved and rebooted. Then I uninstalled and reinstalled ntune but it...

[/img] @truegenius I hope this was done right what do you mean "make 2-3 restarts to use other one."? So what if I fully tweaked through cputweaker, would that be more stable? I know doing it through BIOS is always best but as I said before my tRFC is different from what you talk about. This...

I dont know if I posted the pic right so let me know if I did. So I put a pic of cputweaker, cpu-z with 3 screens, the cpu, memory, and SPD. This is at all stock settings. And please tell me what the fail boot in Bios is when overclocking, I tried to do research and I think I came across it...

Also,getting past 240 fsb would involve up cpu voltage right? well I had it on 1.40 and my temps was like 46 C. Well I looks at the specs for my cpu and it says "Thermal Design Power 125 W and Thermal Specification 61 °C. Should I assume that my cpu handles up to 61 C or most likely 55 C before...

@truegenius I tried the uncore multiplier with no luck. I still get the bios boot fail screen. My temps without overclocking is around 37 C. And with it is around 43 C. And I dont really have a tRFC0 timing in my BIOS. All I have is tRFC with the options of auto, 0, 1, 2, 3, 4. But seriously...

I am sorry to ask but what exactly is the nb multiplier? Is it the same as the cpu multiplier? Well I know it means "northbridge multiplier" but I dont know how to reduce and where to reduce it.

So I tried the timing settings suggested and they worked out ok, but as I tried to push further to acheive 3.0, cputweaker, which I set to boot on, had stuck with it and I got a bsod at 240 fsb. So, since the cputweaker was set on boot, I kept getting automatic restarts like 20 or 30 seconds in...

Thanks for the replies everyone and yes its true that even though we have the same hardware that they might not produce the same results, but it doesnt hurt to try. I will be trying these recommendations as sonn as I get some free time and will post back. Also if I set fsb over 210 then I will...

Is it possible to unlock the cpu multiplier on a non Black Edition Phenom X4 9850? With it stock it has 2.51gb, but the best I can do with the locked multiplier is 2.63gb that is stable. I say stable because when I try to go further, in the POST BIOS screen it tells me that the boot fails and to...