Recent content by darkmindgamer745

I have a wattimeter/voltimeter plugged into the PSU power cord, and when I turn on the amp it consumes only 25w off the wall. I cannot confirm if I am overloading it, it's impossible with the amp on idle http://imgur.com/KXV42rv

But I cannot swallow this issue, the PSU is brand new, when I get home I will try to use 2 psus to turn the amp on, then if no results I must give up...

Well, I guess I give up after all... I spent quite a bit in this PSU, now I'm going to have to buy a psu dedicated for amplifiers

12v rail on psu: 670w and 56A. Amplifier Ampere consumption: 40A musical, 78A peak (9v to 16v op range) Edit: the sub is 4ohm and I will use it in bridge mode. I plugged a 12v wire from the PSU to the amp, and something is happening and it's making the PSU flick on and off, like I showed on...

220v 1 PCYes 750w (it supplies about 670w on 12v rail) 80+ bronze PSU (only 1 12v rail, I cut off all other wires and left 13 12v and like 22 GND wires) , 1 Soundigital sd800.4d amp, 1 pair of JBL Club 6520 50w (120w peak) (3ohm), 1 subwoofer FBaudio 250w (1000w pmpo). I thought the PSU would do...

Hi, I just subscribed so I could get help from someone here. I have a really peculiar situation here and have found nothing like this in the web. Please help me, it's been like 3 days of me messing around with this and no results. (I'm a little bit out of practice with my English, so sorry for...