Recent content by flexxmi

The original fuse was not in the block and I want to make sure I'm reading this right. Do I need a 250v 3A fuse for this unit? Should I get fast blow or slow blow? Are these 6mm x 30mm fuses? Thank you for any help you can provide.

Maybe I need to be a little more specific. There are two pair of this transistor in this unit - 1 each of the 2SA1215 & 2SC2921 for each channel) and all of the lower numbers are matching (4D0). If only one is bad will I need to replace all four with matching lower numbers?

Thank you for the link.

I have a Kenwood KA-94 that blows the fuse as soon as it is powered up. From what I've read these are nice little amps and this one has a phono input on it so I'd like to save it if it's salvageable. I have opened the unit and don't see anything outwardly apparent that is wrong - no bulging...

:-)

Just know that you're the best to someone that appreciates you! Yes, pictures for sure before I begin disassembly. Thank you!!

Thanks a million Natsukage. I have ordered the part and will gather the necessary implements to do the job. It will be a couple of weeks before the part arrives and I don't want to take the board out until I have everything I need in front of me so I can do the job and reassemble without...

They both tested good. Using the diode test setting on my meter 8.0 in only one direction each. You called it - that chip is bad. Now the fun begins of the tear down. Are those power leads crimped to the posts coming out of the board? How do you go about removing them? Do I have to cut...