Recent content by kanewolf

What model is the Samsung TV?

If your laptop isn't booting and is stuck at the BIOS screen then you won't get a display on the HDMI. You should also double check that your didn't accidentally change the video output by one of the function keys on the laptop.

A low-spec laptop like may have some features permanently disabled. Just because Intel puts features in a CPU does not mean every device will support them.

Broken keys would generally be considered "user damage" That is not covered by any manufacturer warranty. Just like spilling soda on your laptop is not covered by warranty.

If the radio plays on both speakers, then the amplifier portion of the Sony is OK. Most of the newer turntables have a built-in phono pre-amp that you can enable or disable. If it does have a built-in pre-amp, then you could connect to another of the Sony inputs like CD or Aux. My first...

The best way to find a value is to use E-Bay and filter on sold items. Since you didn't list the model of the laptop there is no way for me to look it up on E-Bay.

You didn't post the important part of the manual -- https://www.sony.com.sg/electronics/support/res/manuals/3862/38629001M.pdf The important part is on PDF page 47 -- The speaker specifications. They are 8 ohm speakers. That makes it pretty easy to find an amp. I would recommend you go to...

You could have accidentally put an exposure compensation or a flash exposure compensation. Here is how exposure compensation gets set -- https://support-in.canon-asia.com/contents/IN/EN/8202786400.html Here is how to change flash compensation --...

This thread -- http://www.tomshardware.com/answers/id-3724350/router-dnsmasq-vulnerability-issue.html was closed because it sat dormant for 6 months. If you believe you have an issue then you can start your own thread.

Use a wireless microphone placed on the podium with the receiver connected to the audio input on your camera.

MERGED QUESTION Question from colinbarber71 : "Reboot problem no disc"

Start by checking the terminations on the "bad" cable. You could have a stray braid wire shorting it out, or a center conductor that isn't long enough. You could have 1 or more splitters between your antenna and the TV that are dropping your signal. You could have high loss coax. You could...

To run native you need a newer version of Linux kernel to run on Ryzen 2xxx. You need 18.04 or newer. It is possible that your Ubuntu is just too old for Ryzen 2xxx.