Recent content by n3onis

So, I think I'm going to end the test. It's already at 300 bad sectors and at 0% progress. Should I even try remaping or do anything, or is this HDD dead?

I'm at 800.000 sectors out of 1.000.000.000 and the past 140 have shown an error. And it's still at 0% progress. Should I even continue testing / try remapping or whatever? Or is it better buying a new disk? Also, could there be anything else wrong, since 2 disks were corrupted in the same...

Testing the drive with Vivard now and I'm getting a load of errors right away. I guess it is the HDD. Why did it not even detect the disk as bootable on one laptop, but started loading Windows on the other? Even though it never loaded it, it seems pretty weird.

Tested the memory with Windows Memory Diagnostic tool and no errors found after 2 passes. Testing the disk next.

Hello, I've been asked to fix a laptop that doesn't boot and I've narrowed it down to this; Hard disk is relatively new, I switched it in the same laptop not too long ago, when it was corrupted. It worked fine after and now I'm assuming there's a problem with the hard drive again, or possibly...

I found out that the PSU should have the same or a bit higher wattage than the amplifier, as spikes do happen. So for a 150W amplifier, I'm gonna get a 250W power supply.

I'm going to connect a 250W RMS subwoofer to a 150W into 4 ohms Amplifier. I want to connect the amplifier to a computer, so I will need another power supply to do that. - Should I look at the wattage of the amp or the subwoofer when buying a PSU? - Can I connect a let's say 300W PSU to a 150W...