Recent content by nitinahuja

No.

Success! :) I have 7 channels.Thank you very much. When I was testing the antenna ( GE pro Yagi Antenna) from walmart in the day time I got more channels- 14.The antenna was sitting against the wall and ground.When I mounted it on the roof using the existing directv dish arm I had to...

The link for pictures was posted on 3/22 6:34 pm as one of the replies to this thread. What the picture shows is that from the dish cables run into a grey swm box and from the grey swm box into a splitter and from the splitter into the house.

Can the existing green splitter as shown in photograph be used to connect the OTA coax into it? From it the cables are already ran into the house.I can remove the grey swm box outside the house.

Is coupler same as a splitter? https://www.solidsignal.com/pview.asp?p=cm-3212hd Thank you. Are these steps correct: 1.Remove satellite dish and all swm hardware 2.Connect the ota antenna to the mast 3.Connect all the coax cables running into the house to a splitter/coupler 4.connect the...

https://photos.app.goo.gl/n1J9QrN9xBAEe2d02 Yes,Done away with Directv.Do I connect the OTA wire directly into the SWM 18 OTA input?

Smartpass looks good. Would I connect it into the Directv SWM box in grey?

I live in zipcode 41183 and I need channel 3 wsaz etc.I believe about 35 miles.Budget is not a concern.

My home has the following set up: Directv 3 LNB dish plus Directv international dish.I do not need them anymore.How do I use the existing hardware from these dishes to install an Outdoor antenna to get OTA signal into multiple rooms of the house just like the satellite signal was.From dish the...

The screen has multiple vertical lines running from top to bottom and it also has some other lines which look like cracks but they are only on the front of the screen meaning they don't look like deep cracks. The model is Samsung 5 series 5200 50-inch Smart TV. What is the problem?