Recent content by ppercutt

Its exactly the same: (not sure if its supposed to be) When I boot from usb and use atiflash to flash the stock bios to the modded.bin everything is the same: (Every line is old, then next line is new, IE: Old SSID: 2010 New SSID: 2010 - etc) SSID: 2010 P/N: 113-SS2G02-002 DeviceID...

K, this one gets its own post.. So I tried to restart from step one again. When I move "original.bin" into the "Mod BIOS HD 6950" folder and run "run.bat" this error pops up: "Could not find byte sequence in file. Press any key to continue..." And there's no modded.bin being created...

I'll re-run the flash using atiflash after booting into MS DOS and type out the numbers. But yes, I saved the bios using atiwinflash as "bios.rom" then copied it and renamed it "original.bin". Then I copied original.bin into the modded folder, ran the .bat file, and then copied the...

Next puzzle, So I'm back to "normal" now. I placed the new card into the first slot with the new mobo/ram/cpu and its working again just like brand new. So I decide to start over again at step 1. I followed every instruction to the letter. Every last one. Doesn't work, starts to flash...

The saga continues: So we last left off with my old motherboard somehow able to have the new card in the 2nd slot be active and read by GPUZ. Bystander suggested making a bootable USB Flash drive, and I followed the instructions perfectly, and it worked, sort of. I was able to boot into...

So I tried something new: I got out my old motherboard/cpu/ram - Installed old video card into the first slot, and the HiS HD6950 into the 2nd slot. Now I'm in windows 7, running normal, with GPUZ working at it can see the new card even with it "Disabled" in Device Manager. (If I enable it...

Oh, the hours I've spent trying to fix my card... Thank you for the reply bystander, but nothing is ever easy it seems. -------- My current problem: I have my old video card in the 1st slot. I have the HiS HD 6950 (Model H6950QNT2G2M) in the second slot. I can only boot the computer in...

Hello, I purchased the same HiS HD6950 as mentioned in a few previous posts, and when I flashed, it gave the error, but I used the command prop to unlock it and flash it. Now when I try to start the computer it doesn't do anything (brick). What are my options to fix it...