Recent content by venky srinivas

Ok got it thank you

Ok talking about book shelf speakers i have mitashi subwoofer with built in connection for small speaker (basically a 2.1) but from past few days the speakers output is not working on subwoofer is how can i convert that subwoofer into passive and connect it with this 15$ amp????

I bought a power adapter with 12v 5a. So there is no issues with the input point of view. Every thing is working fine now. The only thing is audio quality is not that good!!!! What can i expect from a 15$ amp thanks for you view.

Hi, I have bought a mini amplifier from lepy which is 2.1 channel amplifier and channel specs are as follows: Input power: Dc 12v 3A Ouput power : 15w * 2 channels & 20w subwoofer channel. Speaker impedance: 4-8omhs And i have a 6 set of speakers & a subwoofer from pioneer home theater whose...

Ok thank you jsmithepa i will wait for to get the right adapter instead. I don't want to damage the amp and as far as india goes it not much into production of electtonics there is what our country lacks.

I am from india and 3a adapter cost is almost equal to the amplifier lol and if i use 12v 1a adapter with the amp only the adapter is in danger right not the amp??? I don't want to risk my amplifier

Hi, I bought a new mini amplifier lepy lp838 for my old pioneer home theater system (whose dvd is totally dead).Now the problem is my mini amp asks for input rating of 12v 3a so i am finding difficulty to buy the 12v 3a power adapter but 12v 2a adapter is available at every shop can i use this...

What if i go for the other lepy model which has 2channels and a separate subwoofer ouput?? Then how should i connect the other 5 speakers in 2 channels i.e front left,front right,sorrund left,sorround right,center ?? In the above answer you didn't mentioned about the center speakers.

Hi this is my speaker config My sub is not a self powered and don't know of built in crossover!!! Speakers specs: Front/Center/Surround: 15 Watts per Channel (200 Hz-20 kHz, 1 % THD, 4Ω) – Subwoofer: 20 Watts (45 Hz-200 Hz, 1 % THD, 4Ω) Lepy amp specs: Output power: RMS 15W x 2CH, 20W x...

What about bridging the sub into the two channel?

Hi, I have a pioneer home theatre system who's av receiver is totally dead and now i am figuring out how do i reuse the speakers which the system consist. So i saw the lepy mini amplifier which has 2 channel output and i want to connect my speakers to it is that possible how can i achieve this...

I have pioneer htz-575dv home theatre system. The problem with it is the dvd which came along with is no working it is totally dead,and now my speakers are lying around just like that. I don't know how can i use them with other DVD's because there might be connectivity problem and voltage...

When we connect usb flash drive to aux port using 3.5mm aux to usb 2.0 cable in car it works but can when i use usb bluetooth instead of usb flashdrive will it work will bluetooth work?

Hiii i am thinking to connect usb bluetooth adapter to a cable with 3.5mm aux to female usb 2.0 and this 3.5mm aux will go into my dvd through mp3 link port. So basically i want to turn dvd into wireless using this cable and a usb bluetooth adapter will it work...? 3.5mm to female usb pic...

What are those connectors called..