110 Degrees E6 and E8 : Missing Transponders?

[Jim]

Archived from groups: alt.video.satellite.mpeg-dvb (More info?)

If in setup menu one does a step through the transponders and watches
the signal strengths, it appears a number of the transponders are not
producing a signal, is this normal or is something wrong with my
equipment? I show the following transponders with no signal:
2,4,6,7,8,10,13,17,28,30,32.

 

[Aardvark]

Archived from groups: alt.video.satellite.mpeg-dvb (More info?)

Jim wrote:

> If in setup menu one does a step through the transponders and watches
> the signal strengths, it appears a number of the transponders are not
> producing a signal, is this normal or is something wrong with my
> equipment? I show the following transponders with no signal:
> 2,4,6,7,8,10,13,17,28,30,32.
Mostly normal... see
http/www.lyngsat.com/echo6.html
http/www.lyngsat.com/echo8.html

Look at the "Beams" see if your getting the spot beam AND all the
"Conus" beams for your location.

WW

 

[Guest]

Archived from groups: alt.video.satellite.mpeg-dvb (More info?)

On Sun, 05 Dec 2004 11:36:28 -0800, Jim <wdxp@cox.net> wrote:

>If in setup menu one does a step through the transponders and watches
>the signal strengths, it appears a number of the transponders are not
>producing a signal, is this normal or is something wrong with my
>equipment? I show the following transponders with no signal:
>2,4,6,7,8,10,13,17,28,30,32.


Some are spot beams, some are bad data in the flash.