After Disassembling and cleaning my Laptop, It Won't Bootup

Himanshuzzz

Estimable
Jan 12, 2016
1
0
4,510
0
After disassemble my laptop to clean it, it won't bootup (its getting on while holding the power button), Screen is not turning ON but Power, wifi indicator light is working.
Even i use another VGA Monitor screen it showing no signal. Please help me.
I have HCL D9912- AX8008.


-Sorry for RIP English
 

ffg7

Distinguished
Moderator
take it apart again & carefully put it back together. when I do something like that as in re-assembly, I do it in stages to make certain it powers up & displays ok even with drives & keyboard not installed. is the actual power button switch part of the motherboard or is attached via a ribbon cable?
 

ffg7

Distinguished
Moderator
take it apart again & carefully put it back together. when I do something like that as in re-assembly, I do it in stages to make certain it powers up & displays ok even with drives & keyboard not installed. is the actual power button switch part of the motherboard or is attached via a ribbon cable?
 
Thread starter Similar threads Forum Replies Date
TechnicallyUnsavy Laptop Tech Support 1
M Laptop Tech Support 9
Hisoka95 Laptop Tech Support 3
F Laptop Tech Support 0
A Laptop Tech Support 0
Bonehead74 Laptop Tech Support 1
botasky Laptop Tech Support 1
A Laptop Tech Support 3
T Laptop Tech Support 2
A Laptop Tech Support 1
W Laptop Tech Support 3
C Laptop Tech Support 3
Spacebit Laptop Tech Support 1
N Laptop Tech Support 7
Danteu Laptop Tech Support 14
Zaporro Laptop Tech Support 1
M Laptop Tech Support 7
V Laptop Tech Support 18
C Laptop Tech Support 11
X Laptop Tech Support 12

ASK THE COMMUNITY