Amd Phenom II 550Be unlock issue in prime 95

icomar89

Distinguished
Mar 24, 2010
2
0
18,510
I have Asrock a770de+ mobo and sucessfuly unlock cpu to quad,, =)
Everething running smood but when i run prime95 or game for example, blue screen apears..
I try'd to run in prime95 stress test only for small FFTs and i get error for my core0...

Test 1, 800000 Lucas-Lehmer iterations of M172031 using FFT length 8K.
FATAL ERROR: Resulting sum was 1.463885183786148e+093, expected: 3.271133059443416e+016
Hardware failure detected, consult stress.txt file.

Em i doing somthing wrong over here or my core0 is defective,, Thanks
 

Lmeow

Distinguished
Mar 14, 2010
33
0
18,610
Have you overclocked it? If so, I suggest you go back to stock settings. If not, I'm just guessing that one or two of the cores that you unlocked work, but aren't stable.
 

linaaslt

Distinguished
Oct 22, 2008
2
0
18,510
Bad luck for you m8, one of your cores is defective, the best option for you is to go back to dual core mode. cause one of those unlocked cores is hanging up your system when it's being utilized.
 

icomar89

Distinguished
Mar 24, 2010
2
0
18,510
I didn't overclock, it's on stock settings and i try to increase voltage for cpu to 1,5V and only thing i manage to increase is temp. over 60°C...
In bios i tested with "CPU Active Core Control" set cpu to 0,1 core to see if is one of those and bad luck my core0 is defective i'm unable to use it like x3...
So i'm did what yungster say back on x2...
I manage oced. cpu to 3.6GHz idle "40°C,, load 54°C" and memory to 900MHz 5.5.5.15 stabile :)))
well it isn't quad but 3.6GHz*2 isn't that bad =)
Thanks anyway for replay...