Any way to boot by disabling CSM and enabling Fast Boot & Secure Boot after installing Windows on a new drive on ASUS Laptop?

[FrostBite-X Mritz]

So I was constantly running into BSODs when I used to run my ASUS X556UF on Windows 10 on its factory-shipped 5400RPM HDD (Seagate Momentus 1TB).
I decided to do a SSD-upgrade. Chose a Samsung EVO 250GB. Till date, no BSODs
However; I had to install Windows and also booting now by disabling Fast & Secure Boot options from the Aptio Setup Utility (BIOS) and enabling the CSM. What I want is to be able to boot to Windows by disabling the CSM, enabling Secure and Fast Boot options; which was the case when I used to use the notebook with the factory-HDD.

I believe it's better using the fastboot & secure-boot functions since it is recommended and at "msinfo32", it says it's running on "Legacy BIOS"; which is annoying.

Any solutions for this?

 

[evolt]

Hello,

You will have to Convert your Disk To GPT and then enable UEFI inside BIOS instead of CSM(Legacy mode).

You will then be able to install windows 10 under UEFI and use Fast&Secure Boot.

Regards