I need a cost efficient way to get my computer on the TV screen, though sound alone to my receiver would be adequate...
Computer:
https/pcpartpicker.com/user/DrunkenPanda/saved/dx6BD3
Reciever:
http/store.sony.com/es-7.2-channel-wi-fi-a-v-receiver-zid27-STRDA1800ES/cat-27-catid-All-ES-Home-Theater-Components
TV:
http/www.bestbuy.com/site/samsung-60-class-60-diag--led-1080p-120hz-hdtv/1310136236.p;jsessionid=CFA00D629C36F5719179B69E40C6E03C.bbolsp-app04-197?id=mp1310136236&skuId=1310136236&st=samsung%2060%22%20led&cp=1&lp=8#tab=buyingOptions
Here's a vague model of the Den:
http/s27.postimg.org/xoj5dges3/living_room.jpg
The room size is about 24' x 30' .... which presents a potential problem routing HDMI under the floor... I've considered the course of HDMI over CAT6 through wallplates, powered by the excess in my PSU... which would likely work... but would cost a couple hundred for supplies... is there a viable way to transmit sound wirelessly without delay?
I currently have (for audio only) computer headphone jack > 35' 3.5MM M/F > ipod stereo conversion chord > receiver thing going on but there's an unacceptably loud feedback at higher volumes and the chord is obnoxious...
I bought the receiver for the bluetoooth and wifi capability, but syncing them required streamwhatyouhear (as the best option I found). and had a LONG delay in transition...
While wirelessly is seemingly capable, if I'm going to spend the money and effort to hard wire, I want A/V... so HDMI over CAT6 seems to be the best option... anybody have any other ideas/suggestions?
Computer:
https/pcpartpicker.com/user/DrunkenPanda/saved/dx6BD3
Reciever:
http/store.sony.com/es-7.2-channel-wi-fi-a-v-receiver-zid27-STRDA1800ES/cat-27-catid-All-ES-Home-Theater-Components
TV:
http/www.bestbuy.com/site/samsung-60-class-60-diag--led-1080p-120hz-hdtv/1310136236.p;jsessionid=CFA00D629C36F5719179B69E40C6E03C.bbolsp-app04-197?id=mp1310136236&skuId=1310136236&st=samsung%2060%22%20led&cp=1&lp=8#tab=buyingOptions
Here's a vague model of the Den:
http/s27.postimg.org/xoj5dges3/living_room.jpg
The room size is about 24' x 30' .... which presents a potential problem routing HDMI under the floor... I've considered the course of HDMI over CAT6 through wallplates, powered by the excess in my PSU... which would likely work... but would cost a couple hundred for supplies... is there a viable way to transmit sound wirelessly without delay?
I currently have (for audio only) computer headphone jack > 35' 3.5MM M/F > ipod stereo conversion chord > receiver thing going on but there's an unacceptably loud feedback at higher volumes and the chord is obnoxious...
I bought the receiver for the bluetoooth and wifi capability, but syncing them required streamwhatyouhear (as the best option I found). and had a LONG delay in transition...
While wirelessly is seemingly capable, if I'm going to spend the money and effort to hard wire, I want A/V... so HDMI over CAT6 seems to be the best option... anybody have any other ideas/suggestions?