I recently updated my control center to beta 13.6 cause the others wouldn't open, but when I opened it, it only came up with the settings for my CPU and not my graphics card. If it matters my graphics card is Radeon HD 4850
I would suspect you would need to remove the Video Drivers, use Drive Sweeper to remove all the remnants, then reboot you will be in VGA mode, then run the install again. Make sure Windows was already up to date, VBIOS / BIOS upto date and so on.
I would suspect you would need to remove the Video Drivers, use Drive Sweeper to remove all the remnants, then reboot you will be in VGA mode, then run the install again. Make sure Windows was already up to date, VBIOS / BIOS upto date and so on.