cersor is not opening any folder even closing the file but am able to move it to any point

You should be able to get here via the keyboard, but if not, then do try an external mouse.

Try the following and see if it fixes it...

1. Go into "Control Panel".
2. Click "Hardware and Sound".
3. Now click "Mouse and Touchpad".
4. Now go to "Additional mouse options".
5. The Mouse Properties window will open. In here click on your device.
6. Make sure your device is set to enabled. If it isn't then click "Enable Device".
7. Exit both that screen and "Control Panel".

Also, you might want to check for updates to your drivers, including the Synaptics drivers.

If this does not help, and an external mouse works fine, then it may well be a hardware issue.
 
You should be able to get here via the keyboard, but if not, then do try an external mouse.

Try the following and see if it fixes it...

1. Go into "Control Panel".
2. Click "Hardware and Sound".
3. Now click "Mouse and Touchpad".
4. Now go to "Additional mouse options".
5. The Mouse Properties window will open. In here click on your device.
6. Make sure your device is set to enabled. If it isn't then click "Enable Device".
7. Exit both that screen and "Control Panel".

Also, you might want to check for updates to your drivers, including the Synaptics drivers.

If this does not help, and an external mouse works fine, then it may well be a hardware issue.
 
Thread starter Similar threads Forum Replies Date
U Laptop Tech Support 1
L Laptop Tech Support 0
C Laptop Tech Support 2
P Laptop Tech Support 4
M Laptop Tech Support 0
M Laptop Tech Support 9
David66 Laptop Tech Support 3
M Laptop Tech Support 3
S Laptop Tech Support 9
K Laptop Tech Support 1
P Laptop Tech Support 2
Franznathan Laptop Tech Support 1
Mvnch Laptop Tech Support 0
OhGod Laptop Tech Support 3
L Laptop Tech Support 1
Alden66 Laptop Tech Support 3
ina_dee Laptop Tech Support 8
K Laptop Tech Support 1
E Laptop Tech Support 2
Kohai-Amber Laptop Tech Support 2

ASK THE COMMUNITY