Conversion of Panasonic IC FET 4 Channel Stereo to Bluetooth

Aug 19, 2018
3
0
10
0
Anyone have any suggestions? I don't have an output here and need some advice on how to get one.

Very new to this, and this thing is older than me. :)
 
If you are trying to connect a bluetooth transmitter to it then connect it to one of the front tape record outs.
If you are trying to connect a bluetooth receiver it can connect it to the front aux or tape playbacks.
There should be a mode that allows all four channels to work with a 2 channel input.
 
Aug 19, 2018
3
0
10
0


 
If you are trying to connect a bluetooth transmitter to it then connect it to one of the front tape record outs.
If you are trying to connect a bluetooth receiver it can connect it to the front aux or tape playbacks.
There should be a mode that allows all four channels to work with a 2 channel input.
 
Thread starter Similar threads Forum Replies Date
M Audio 9
M Audio 1
T Audio 1
AndrewFreedman Audio 9
A Audio 3
P Audio 1
G Audio 1
T Audio 7
C Audio 6
M Audio 5
D Audio 3
M Audio 2
E Audio 1
P Audio 4
G Audio 6
E Audio 1
R Audio 2
P Audio 1
D Audio 1
R Audio 1

ASK THE COMMUNITY