This is not a question this is a statement.
About 2 months ago i started to get random bsods right after windows would open. I was using both All CPU Meter on my desktop and CoreTemp to monitor temps in All CPU Meter. What would happen is after the computer would start sometimes one of the cores would hang at 100% then it would crash. These where non pagefile area bsods that would indicate some kind of memory problem, sometimes video problems, or sometimes harddrive problems. I tested everything down to the video ram and the L2 cache, along with the northbridge itself. Also my harddrives and Ram. I tested EVERYTHING. Heck even Avast and AMD drivers where considered for a time as both of these are written about in various forums.
Anyways, about a month ago, I decided to do a reformat. The very last program i installed was Coretemp. This was after everything not including my games. Immediatly one of the cores hung and i received a bsod. Then i remembered that the last program always to load into the tray was coretemp and that was when the bsod happened. I also remembered that they started to happen when the new version of coretemp came out. Now I am not sure if it the combination of those 2 programs. All I know for sure is that as when i uninstalled Coretemp the bsods stopped happening.
I do not think this happens to everyone but you can go to the Coretemp site and see that there are many people that have had the same problem with this program as I have.
I have not had a bsod since i stopped using it. It has been over a month. Also 24 hours prime no bsods on this overclock. http/valid.canardpc.com/2803211. Which i have had since i purchased my Vishera 8350 several months back.
About 2 months ago i started to get random bsods right after windows would open. I was using both All CPU Meter on my desktop and CoreTemp to monitor temps in All CPU Meter. What would happen is after the computer would start sometimes one of the cores would hang at 100% then it would crash. These where non pagefile area bsods that would indicate some kind of memory problem, sometimes video problems, or sometimes harddrive problems. I tested everything down to the video ram and the L2 cache, along with the northbridge itself. Also my harddrives and Ram. I tested EVERYTHING. Heck even Avast and AMD drivers where considered for a time as both of these are written about in various forums.
Anyways, about a month ago, I decided to do a reformat. The very last program i installed was Coretemp. This was after everything not including my games. Immediatly one of the cores hung and i received a bsod. Then i remembered that the last program always to load into the tray was coretemp and that was when the bsod happened. I also remembered that they started to happen when the new version of coretemp came out. Now I am not sure if it the combination of those 2 programs. All I know for sure is that as when i uninstalled Coretemp the bsods stopped happening.
I do not think this happens to everyone but you can go to the Coretemp site and see that there are many people that have had the same problem with this program as I have.
I have not had a bsod since i stopped using it. It has been over a month. Also 24 hours prime no bsods on this overclock. http/valid.canardpc.com/2803211. Which i have had since i purchased my Vishera 8350 several months back.