CPU cooking with Corsair H100i

danjengunga

Estimable
May 3, 2014
7
0
4,510
Does anyone have any suggestions on H100i configuration? I've got a brand new H100i on new Intel I7 hex core and an Asus x79 motherboard. Sitting at idle in BIOS CPU temps climb slowly without stopping until machine shuts down. At power up H100i lamp is white but goes to red in about 3 seconds. H100i fans spin, one of the hoses is warm. BIOS displays CPU fan error. Yes the 3 pin (but only one wire) connector is attached to mobo header (I've tried several different headers on board). I've cleaned CPU and cooling surface and re-applied heatsink compound. No avail.

Any suggestions will be much appreciated.
 

danjengunga

Estimable
May 3, 2014
7
0
4,510
The h100i is hooked up per instructions, the pump (wire coming off of h100i module) is hooked to header on motherboard labeled 'cpu fan'. Fans are hooked up to Y-cable provided with h100i unit which is in turn attached to connector on side of h100i, as stated in instructions.
 

Y0GI

Honorable
Jul 22, 2013
47
0
10,610


What about the USB cable?

Yogi

 

danjengunga

Estimable
May 3, 2014
7
0
4,510


 

danjengunga

Estimable
May 3, 2014
7
0
4,510
I believe the pump gets its power from the SATA-style power cable attached. Only one of the pins on the fan header has a wire on it, the sense pin. The pump appears to be getting power since the pump led is working, but it could well be that the pump itself if faulty as I can't hear any noise coming from that part.
 

TRENDING THREADS