Question Diagnosing backlight issue on a TCL 55s405

Sep 14, 2021
1
0
10
0
Hey everyone,

I have a TCL 55s405 that just had the backlight stop functioning over the weekend. The unit still powers on, still produces sound when pressing buttons on the remote, and using a flashlight on the screen allows me to see that the menu is being displayed, so I'm confident that it is just the backlight that is the issue.

I have opened it up and tested voltage to the LEDs from the powerboard, and think I have determined that it is an issue with that board, but wanted to make sure before I start dumping money into parts. There are 4 wires connected on the 10 pin connector and the voltage I get on the 4 pins with wires are as follows:

Pin 9- Top wire (black) - .7V
Pin 7- Second wire (red) 0V
Pin 4- Third wire (white) 0V
Pin 2- Bottom wire (red) 0V

Pins 7 & 9 are one circuit and Pins 2 & 4 are another. Considering that I'm getting different results from each of the circuits, and no voltage at all on one of them, I figure something is definitely wrong there. Am I safe assuming that the power board is the issue or are there further tests I should do to confirm that?

Thanks for any help or recommendations you can give me!
 
Thread starter Similar threads Forum Replies Date
S TVs 0
G TVs 0
O TVs 0
M TVs 0
P TVs 5
D TVs 0
R TVs 1
C TVs 0
M TVs 0
readingcraze TVs 2
G TVs 1
Axellion TVs 1
I TVs 1
A TVs 3
C TVs 1
T TVs 1
RazerMoon TVs 1
Patrick3214 TVs 0
dj505 TVs 19
D TVs 1

ASK THE COMMUNITY