Extend OTA coax signal directly to TVs digital tuner - wirelessly

mike.katulka

Prominent
Dec 17, 2017
1
0
510
I have an older 4 bedroom house that does not have coax in each room. I currently only have an antenna in the attic and connected that to HD HomeRun to run on some Amazon Fire sticks.

What I am looking to do is also utilize the built in digital tuner in the back of some TVs without running a coax line to those locations. I want to extend that plain old coax signal to a coax receiver wirelessly.

I cannot find a device that does this. I keep finding IR transmitters and Moca, neither match my need.

The HD HomeRun is good but is limited to 2 TVs at the moment. Also requires my wifi. Also requires a fire stick.

Last resort I will have coax ran for these locations but am hoping there is a kit out there.

Thanks!
 
Solution
Since no TV has video outputs you can't use the internal tuner on anything other than the TV it's built into. You can use external tuners and send them to more than one TV. Something like this might suit you.
https://www.tablotv.com/
You can send the HDMI output of any OVA tuner to remote TVs with wireless HDMI but that would cost much more than running coax cable.
Since no TV has video outputs you can't use the internal tuner on anything other than the TV it's built into. You can use external tuners and send them to more than one TV. Something like this might suit you.
https://www.tablotv.com/
You can send the HDMI output of any OVA tuner to remote TVs with wireless HDMI but that would cost much more than running coax cable.
 
Solution