[HELP] EXP GDC Problem (No new hardware were detected, wont boot-up)

Status
Not open for further replies.

jaydent1800

Commendable
Apr 18, 2016
9
0
1,510
Recently i bought a new EXP GDC ( https://www.amazon.com/Laptop-External-PCI-Graphics-Card/dp/B00Q4VMLF6 ) for my Lenovo Thinkpad Edge E430. my current situation is when i use the m-PCIe to HDMI cable connect into my M.2 m-PCIe port and connect to the EXP GDC HDMI port, it actually boot-up, GPU fan start spinning but no new hardware were being detected. OK, fine, i remove my wireless card and do the same thing, no luck, it even go worst. my internal display black screen, display nothing. (cant even boot into bios)
I haven't try to using external display yet.

PS: before doing this i already disable my dedicated GPU in my bios setup.

Please HELP!!

Setup:
Thinkpad Edge E430
GTX 650 ti boost
Corsair CX500
EXP GDC V8?/V7?

Thanks in advance.
 

jaydent1800

Commendable
Apr 18, 2016
9
0
1,510
Are you using the same device and using internal display or external display? i think 2gb not enough for gaming tho. even you have good gpu the ram may bottle-necked your overall performance


Thanks for reply
 

Ulises_1

Commendable
Jul 22, 2016
8
0
1,520


 

jaydent1800

Commendable
Apr 18, 2016
9
0
1,510


sorry if i let you misunderstood my question. Are you using the same laptop? and which port you are being using? M.2 PCIE slot or wireless card PCIE slot?
and again thanks for reply
 
Status
Not open for further replies.