Help with audio setup.

[Argaudas96]

Hello, so I'm planning to buy a speaker set for my homestead (if that's the right word). And i need some tips before buying an amp. Currently i have a set of RadioTechnika S-300 supersound speakers. And i need an amp, got a friend that would sell me Auna AMP-5100-B relatively cheap, 40euros. I could get another pair of RadioTechnika S90 speakers. And my question is, how do i know how much power each output can generate? And would this setup work well? And if it would work, which speakers to which output would be the best to connect? Call me dumb but I'm new to this stuff and don't want to burn any speakers or the amp itself.

RadioTechinka S-300, 300W, 8-16ohm.
RadioTechinka S-90, 40W, 4ohm.
Amp, max power 1200W. Total power - equivalent to 2 x 100W RMS + 3 x 40W RMS.
2 x front channels, 4-16ohm.
Center 8-16ohm.
2 x surround channels, 8-16ohm

 

[Alabalcho]

According to the specs, your speakers will work with that receiver. Just make sure you put your 8Ohm speakers on real / center channels.

And don't pay attention to "1200W total power" and other marketing BS.