Solved! Heos amp

[Sbronson11]

Can three 8ohm speakers be connected to the Heos Amp?

 

[americanaudiophile]

It will not drive three pair of 8 ohm speakers in parallel.
There are ways around that.
1. If you use impedance matching volume controls for each pair that would let you set the impedance to show 4 ohms to the Heos Amp. It would also let you control the volume of each pair individually.
https://www.sonance.com/electronics/speakers-selectors-volume-controls/impedance-matching-volume-controls
2. If you connect the speakers to an Impedance matching speaker selector that would work.
https://www.amazon.com/SS4-Speaker-Selector-Impedance-Matching/dp/B002I9XKTE
3. If you connected two pair in series and the last pair in parallel with the first two pairs that would be safe.
http://physics.bu.edu/py106/notes/Circuits.html

 

[americanaudiophile]

It will not drive three pair of 8 ohm speakers in parallel.
There are ways around that.
1. If you use impedance matching volume controls for each pair that would let you set the impedance to show 4 ohms to the Heos Amp. It would also let you control the volume of each pair individually.
https://www.sonance.com/electronics/speakers-selectors-volume-controls/impedance-matching-volume-controls
2. If you connect the speakers to an Impedance matching speaker selector that would work.
https://www.amazon.com/SS4-Speaker-Selector-Impedance-Matching/dp/B002I9XKTE
3. If you connected two pair in series and the last pair in parallel with the first two pairs that would be safe.
http://physics.bu.edu/py106/notes/Circuits.html