Hi, guy. I have a 2400watts amp with two 200 watts 15" speakers. Is it matched?

If you play two 200 watt speakers being driven by a 2400 watt amp you will have enough excess power to blow then up easily. A 400 watt amp would be a match for them. Many amps do have exaggerated power rating. It would also depend on what impedance the amp is 2400 watts into.
If the amp is 2400 into 2 ohms it would be 600 into 8 ohms so if you can connect the two woofers to present 8 ohms to the amp it would is closer to being safe.
 
If you play two 200 watt speakers being driven by a 2400 watt amp you will have enough excess power to blow then up easily. A 400 watt amp would be a match for them. Many amps do have exaggerated power rating. It would also depend on what impedance the amp is 2400 watts into.
If the amp is 2400 into 2 ohms it would be 600 into 8 ohms so if you can connect the two woofers to present 8 ohms to the amp it would is closer to being safe.
 
Thread starter Similar threads Forum Replies Date
FirstLast1234 Audio 2
Gal Blech Audio 5
N Audio 1
R Audio 4
N Audio 5
R Audio 1
R Audio 5
S Audio 14
L Audio 1
V Audio 7
A Audio 7
T Audio 3
K Audio 2
Clunker Audio 4
D Audio 5
P Audio 1
G Audio 2
J Audio 3
L Audio 2
S Audio 2
Similar threads
Question What aret he best AV receivers with 200 watts per channel under $250?
Question So, how many watts are my speakers?
Solved! I have four tens one is a pioneer to believe 1000 wstt max its 2ohm and one 10 inch thats a kenwood 1100 watt max its a 4ohm a
Volume Control 3 ohm impedance 70 watt Speakers with 3-4 ohm receiver
Solved! Can we connect 5watts speaker with 30 watts Amplfier
i have a 1000 watts car amplifier, can i used 1000watts cps?
I have samsung hometheater 1330 watts speakers would they work on onkyo 7.2 220watts channel reciver
Can I run two 650 watt speaker and two 350 watt speaker from a 1000 watt amplifier
2 600 watt subs trying to connect to a single 600 amp
How to connect 6 speakers into 2 channel amplifier? What happens to the watt requirement?
Can I run 1200 w subs on a 1000 watt amp
I have a M/A Audio 1000 watt monno block amp that have 2 10 inch kicker comp 4 ohm svc connected to it both positive same port
What 10 ' speakers that can handle a 1000 watt Rockford amp
Hooking up old stereo speakers to my PC. Will this work? Bad idea?
Is amp necessary if home system puts out 1000 watts at 3 ohms?
Will this work Pioneer HTP-074 + Polk Audio R50 150-Watt
Does 30 x 2 actually mean 30 watts per speaker or 60 watts per speaker
How do I connect 1 kicker cvr12 and 1 sonyxplod12 to a 750 watt monoblock amp
I have a 700 watt subs and wondering if I use 2800 watt amp
200 watts minimum , Each speakers sound can be controlled individually by remote and if I place the speakers one by computer s

ASK THE COMMUNITY