How do I properly connect a Sansui G6700, an ADC Soundshaper 3, and a Phase Linear 1000 series 2 properly? Thanks

[sansui1957]

I had it all hooked up at one time and it sounded great. Moved everything around recently and all the old paper labels simply fell apart any ideas out there?

 

[kanewolf]

The only way you could connect these devices is via the tape connections on the Sansui. That is the only line-level outputs that unit has. You will then have to use the tape monitor buttons to get the modified signal back into the power amp.

So -- Sansui tape 1 rec -> ADC input ... ACD output -> Phase Linear input ... Phase Linear output -> Sansui tape 1 play ....

 

[chris-L]

Alternative hook up = Sansui tape rec out to ADC line in, ADC line out back to Sansui tape play in. Then, ADC tape rec out to Phase Linear
line in Phase line out back to ADC tape play in. TO USE : press tape monitor button on Sansui G6700 to hear the ADC with any source. Press
tape monitor on ADC to hear Phase Linear with any source. This allows you to select/de-select the Phase Linear if you want/don't want it and/or
select/de-select both ADC and Phase by pressing appropriate tape monitor switches.