Solved! How to disable safe Mode on Microsoft 8 dell

[danze8527]

How to disable safe Mode on Dell Microsoft 8? I’m guessing this is my problem. I accidentally interrupted the factory reset and my computer turned off. Now when I power it on it says that it’s Preparing Automatic Repair then it says Diagnosing Pc. After that the screen turns black and restarts that process over again. I was able to hit F12 and I performed a system test. Everything came back normal but once I exit out of that screen it just continues trying to reboot, but doesn’t. Please help!!!

 

[webworkings]

That has nothing to do with "Safe Mode". Try the info below to see if you can get it working or not.

Note: If this problem started after an update (or system reinstall), please make sure the laptop is not connected to the internet in any way before you use the following instructions.

Try the following...

1. Power off the laptop.
2. Power on the laptop.
3. As soon as you see the rotating loading circle, press and hold the Power Button until the computer shuts off.
4. Repeat this process a few times until you see the "Preparing Automatic Repair" screen.
5. Now you want to let the laptop boot to the "Automatic Repair" screen.
6. Click "Advanced Options" and then select "Troubleshoot".
7. Here you want to select "Refresh your PC", if you do not wish to erase data, or "Reset your PC" to erase all data and restore your system.
8. From here just follow the screen instructions until the recovery is completed.

NOTE: You will need to get into the "Advanced Options" in order to get the "Refresh Option". This choice will keep your data, but any programs installed will be lost.

Do not do a "Reset" as that will wipe all data you have on the laptop.


Another version of this is the following...

1. Power off the laptop.
2. Power on the laptop.
3. When screen turns black, hit F10 and ALT repeatedly until the computer shuts off.
4. To fix the computer you should choose the second option listed.
5. When the next screen loads, choose the option "Reset Device".
6. Now choose which ever type of reset you wish.
7. Your computer should now restore itself to "Factory Settings".

NOTE: If you get a message saying "Error Resetting Device", then you should have the computer looked at by the manufacturer (if still under warranty) or by a tech.