How to hook up the LG blue ray 3d home surround system to my sanyo rear projection

Jun 9, 2018
1
0
10
0
Surround system has 2 rca jacks on it red and white but don't have the yellow for video and my tv only has rca jacks and coax hookups
 
Without model numbers we can't tell what connections you have.
If the TV has a headphone jack or analog audio output then use that. If it has speaker terminals you can use a speaker to line level converter.
If the TV has a digital audio output you will need a digital to analog converter.
If the TV has no audio outputs then you will need to connect your sources audio outputs directly to the HTS. You may need an HDMI input selector with audio extraction.
 
Without model numbers we can't tell what connections you have.
If the TV has a headphone jack or analog audio output then use that. If it has speaker terminals you can use a speaker to line level converter.
If the TV has a digital audio output you will need a digital to analog converter.
If the TV has no audio outputs then you will need to connect your sources audio outputs directly to the HTS. You may need an HDMI input selector with audio extraction.
 
Thread starter Similar threads Forum Replies Date
R Audio 6
Aesmodan13 Audio 1
L Audio 1
P Audio 0
C Audio 1
T Audio 3
RJGrayLight Audio 1
Synthipedia Audio 0
B Audio 2
L Audio 6
W Audio 0
L Audio 1
J Audio 7
R Audio 10
C Audio 3
B Audio 5
A Audio 2
M Audio 2
ardacavdar Audio 1
A Audio 1

ASK THE COMMUNITY