Question HP Omen 17 AN113NS it does not work

Aug 24, 2022
1
0
10
0
When I connect the power supply, current arrives at 5v and 3v, but the 3v after about 1 second stays at 0v.
The consumption indicated by the source is about 30mah and after about 0ne second there is no more consumption.
bios 3V arrive and disappear after 1 second.
In the KBC no current arrives at pin vcc nº11.
3v arrives at the power button and when I connect it stays at 0V .
Mosfet 1:
5,6,7,8 - 19,53v ; DC 0,640v
1,2,3 - 19,53v ; DC 1,618v
8 - 25,35v ; DC 1,417v
Mosfet 2:
5,6,7,8 - 19,53v ; DC 0,640v
1,2,3 - 19,53v ; DC 1,618v
8 - 25,35v ; DC 1,417v
Coil 5V: 5,124v ; DC 0,375v
Coil 3V: 3,392v (one second=0v) ; DC 0,363v
coil Battery: 2,914v ; DC 0,188v
Coil Memory: 0v ; DC 0,128v
Coils GPU: 0v ; DC 0,001v-0,002v
Coils CPU: 0v ; DC 0,006v-0,003v-0,019v-0,046v
Remaining coils: 0v ; DC 0.046v-0.071v

All measurements are only with the motherboard. Without battery or memories or any hardware connected.
 

ASK THE COMMUNITY