I am working on notepad with pen drive and suddenly stopped working and shows application exe is not correct and when again I

80bkusumb

Prominent
Nov 20, 2017
1
0
510
0
I am working on notepad with pen drive and suddenly stopped working and shows application is not correct and when I again open it shows only cursor with black screen
 
Try these...


Option 1 ...

1. First, while the computer is off, connect an external monitor.
2. Next turn on the computer and allow it to fully load.
3. Once loaded, press the "Windows Key" + "P" to open the "Easy Display Switcher".
4. In here select "Computer only".
5. Now shut down the computer and disconnect the external monitor.
5. Disconnect the external monitor
6. And finally restart the computer.


Option 2 ...

Make sure you wait until the computer would be fully loaded before trying this, and not try it right away like you would to say get into BIOS. This needs you to actually be where you would be when Windows Explorer loads.

1. Press "Shift" repeatedly until the "sticky keys" window shows up.

2. Now click the the link there that will lead to the "Ease of Access Center".

3. Next click "Cancel" on the the bottom right corner of the "Set Up Sticky Keys" window.

4. From here you want to click "Control Panel" on the upper left corner (it should be right beside the "Make Your Computer Easier to Use" title.

5. Locate the "Computer Settings" menu and then choose the "Recovery" icon (make sure that your view of this is by either large or small icons for easier access).

6. Now click and open "System Restore".

7. Here you want to click next on the bottom right corner (a few times) until the button "Finish" shows up and then click it. (Just follow everything prompt that the window says which will lead you to recovering your previous system, in a certain time.

8. The computer will now do the work it needs to and then reboot.


If that doesn't work, you can try the following...

You can also try doing the Ctrl+Alt+Delete and see if you can get "Task Manager" to show.


If the "Task Manager" windows shows, then choose "New Task" and then type in EXPLORER. If the desktop shows up then you need to go into "Start", "Programs", then "Accessories" and finally "Command Prompt". (Or you can do a search for CMD.)

Make sure you load the "Command Prompt" with Administrator access. Then when it loads type in....

SFC /SCANNOW

It will do a file check.

To learn more about "SFC" visit this link at Microsoft... https://support.microsoft.com/en-us/kb/929833
 
Try these...


Option 1 ...

1. First, while the computer is off, connect an external monitor.
2. Next turn on the computer and allow it to fully load.
3. Once loaded, press the "Windows Key" + "P" to open the "Easy Display Switcher".
4. In here select "Computer only".
5. Now shut down the computer and disconnect the external monitor.
5. Disconnect the external monitor
6. And finally restart the computer.


Option 2 ...

Make sure you wait until the computer would be fully loaded before trying this, and not try it right away like you would to say get into BIOS. This needs you to actually be where you would be when Windows Explorer loads.

1. Press "Shift" repeatedly until the "sticky keys" window shows up.

2. Now click the the link there that will lead to the "Ease of Access Center".

3. Next click "Cancel" on the the bottom right corner of the "Set Up Sticky Keys" window.

4. From here you want to click "Control Panel" on the upper left corner (it should be right beside the "Make Your Computer Easier to Use" title.

5. Locate the "Computer Settings" menu and then choose the "Recovery" icon (make sure that your view of this is by either large or small icons for easier access).

6. Now click and open "System Restore".

7. Here you want to click next on the bottom right corner (a few times) until the button "Finish" shows up and then click it. (Just follow everything prompt that the window says which will lead you to recovering your previous system, in a certain time.

8. The computer will now do the work it needs to and then reboot.


If that doesn't work, you can try the following...

You can also try doing the Ctrl+Alt+Delete and see if you can get "Task Manager" to show.


If the "Task Manager" windows shows, then choose "New Task" and then type in EXPLORER. If the desktop shows up then you need to go into "Start", "Programs", then "Accessories" and finally "Command Prompt". (Or you can do a search for CMD.)

Make sure you load the "Command Prompt" with Administrator access. Then when it loads type in....

SFC /SCANNOW

It will do a file check.

To learn more about "SFC" visit this link at Microsoft... https://support.microsoft.com/en-us/kb/929833
 
Thread starter Similar threads Forum Replies Date
E Laptop Tech Support 5
yuukiaira Laptop Tech Support 3
F Laptop Tech Support 3
D Laptop Tech Support 0
M Laptop Tech Support 1
Michael@Jensen@WK Laptop Tech Support 0
S Laptop Tech Support 2
R Laptop Tech Support 2
M Laptop Tech Support 1
E Laptop Tech Support 1
Artherisk Laptop Tech Support 1
C Laptop Tech Support 0
S Laptop Tech Support 0
Calab Laptop Tech Support 1
The Coom Slayer Laptop Tech Support 0
Nickpug9 Laptop Tech Support 1
Linda Shrum Laptop Tech Support 2
H Laptop Tech Support 4
Kholens Laptop Tech Support 3
T Laptop Tech Support 1
Similar threads
Question HELP!!! ACER Spin 1 Sp111-34N - Keyboard and mousepad stopped working.
Question Why does my laptop mysteriously stop working, then works the next day?
Question Headphones makes my computer stop picking up sound
Question Asus ROG gl553vd keyboard stopped working
Question LENOVO Ideapad 320: Power button light and fan turn on, display won’t display anything.
Question Battery shows 100%, not working, charge capacity 500.000 while design capacity is 38.000...
Question USB only partially working
Question Screen cable shorted. Now the display is not working, but touch input is fine.
Question Water damage: Some keys (t,y,Tab,ctrl,f3, f4, f6) not working EVEN with USB/bluetooth keyboard, but touchscreen keyboard working. HP Pavilion x360
Question Custom built PC headsets not working!
Question My earphone mic not detecting my all in one built pc
Question HP Envy X360 aq0 power button not working when in situe, any solutions?
Question HP 640 probook won't work off battery only mains
Question HP 15-n013ca Pavilion some keys not working
Question Trying to get external mic to work and not use internal mic but external mic is never recognised as an individual mic and
Question Replaced laptop screen cable, now screen doesn't work at all.
Question Need help mic not working
Question Realtek Subwoofer Not Working, Missing as "Audio Channels", Only 2 speaker "Stereo" Available
Question Please Help me. my HP Pavilion dm3 laptop USB ports Stop Working
my laptop(Asus A455l notepad) is not work the keys 123456789 and T.How can I do?

ASK THE COMMUNITY