I update de Graphics C. Driver and my laptop screen turn black

Jun 27, 2018
1
0
10
0
Now i cant use the laptop.

I tried to restart it in safe mode but nothing. The only thing i can see is the ACER logo when i turn it on, then the screen goes black
 
Try these...


Option 1 ...

1. First, while the computer is off, connect an external monitor.
2. Next turn on the computer and allow it to fully load.
3. Once loaded, press the "Windows Key" + "P" to open the "Easy Display Switcher".
4. In here select "Computer only".
5. Now shut down the computer and disconnect the external monitor.
5. Disconnect the external monitor
6. And finally restart the computer.


Option 2 ...

Make sure you wait until the computer would be fully loaded before trying this, and not try it right away like you would to say get into BIOS. This needs you to actually be where you would be when Windows Explorer loads.

1. Press "Shift" repeatedly until the "sticky keys" window shows up.

2. Now click the the link there that will lead to the "Ease of Access Center".

3. Next click "Cancel" on the the bottom right corner of the "Set Up Sticky Keys" window.

4. From here you want to click "Control Panel" on the upper left corner (it should be right beside the "Make Your Computer Easier to Use" title.

5. Locate the "Computer Settings" menu and then choose the "Recovery" icon (make sure that your view of this is by either large or small icons for easier access).

6. Now click and open "System Restore".

7. Here you want to click next on the bottom right corner (a few times) until the button "Finish" shows up and then click it. (Just follow everything prompt that the window says which will lead you to recovering your previous system, in a certain time.

8. The computer will now do the work it needs to and then reboot.


If that doesn't work, you can try the following...

You can also try doing the Ctrl+Alt+Delete and see if you can get "Task Manager" to show.


If the "Task Manager" windows shows, then choose "New Task" and then type in EXPLORER. If the desktop shows up then you need to go into "Start", "Programs", then "Accessories" and finally "Command Prompt". (Or you can do a search for CMD.)

Make sure you load the "Command Prompt" with Administrator access. Then when it loads type in....

SFC /SCANNOW

It will do a file check.

To learn more about "SFC" visit this link at Microsoft... https://support.microsoft.com/en-us/kb/929833
 
Try these...


Option 1 ...

1. First, while the computer is off, connect an external monitor.
2. Next turn on the computer and allow it to fully load.
3. Once loaded, press the "Windows Key" + "P" to open the "Easy Display Switcher".
4. In here select "Computer only".
5. Now shut down the computer and disconnect the external monitor.
5. Disconnect the external monitor
6. And finally restart the computer.


Option 2 ...

Make sure you wait until the computer would be fully loaded before trying this, and not try it right away like you would to say get into BIOS. This needs you to actually be where you would be when Windows Explorer loads.

1. Press "Shift" repeatedly until the "sticky keys" window shows up.

2. Now click the the link there that will lead to the "Ease of Access Center".

3. Next click "Cancel" on the the bottom right corner of the "Set Up Sticky Keys" window.

4. From here you want to click "Control Panel" on the upper left corner (it should be right beside the "Make Your Computer Easier to Use" title.

5. Locate the "Computer Settings" menu and then choose the "Recovery" icon (make sure that your view of this is by either large or small icons for easier access).

6. Now click and open "System Restore".

7. Here you want to click next on the bottom right corner (a few times) until the button "Finish" shows up and then click it. (Just follow everything prompt that the window says which will lead you to recovering your previous system, in a certain time.

8. The computer will now do the work it needs to and then reboot.


If that doesn't work, you can try the following...

You can also try doing the Ctrl+Alt+Delete and see if you can get "Task Manager" to show.


If the "Task Manager" windows shows, then choose "New Task" and then type in EXPLORER. If the desktop shows up then you need to go into "Start", "Programs", then "Accessories" and finally "Command Prompt". (Or you can do a search for CMD.)

Make sure you load the "Command Prompt" with Administrator access. Then when it loads type in....

SFC /SCANNOW

It will do a file check.

To learn more about "SFC" visit this link at Microsoft... https://support.microsoft.com/en-us/kb/929833
 
Thread starter Similar threads Forum Replies Date
M Laptop Tech Support 0
P Laptop Tech Support 5
A Laptop Tech Support 3
A Laptop Tech Support 1
A Laptop Tech Support 1
nashvilletngirl Laptop Tech Support 1
R Laptop Tech Support 5
S Laptop Tech Support 1
C Laptop Tech Support 1
S Laptop Tech Support 3
J Laptop Tech Support 19
A Laptop Tech Support 2
T Laptop Tech Support 4
K Laptop Tech Support 2
N Laptop Tech Support 13
M Laptop Tech Support 13
L Laptop Tech Support 3
L Laptop Tech Support 1
W Laptop Tech Support 4
R Laptop Tech Support 2
Similar threads
Question Acer Nitro 5 restarted when updating graphic drivers and now external monitor won’t work (screen broken)
Question Which updated graphics driver should I install from intel's website?
Recently I have installed updated graphics driver Amd Radeon HD 7670M to the latest version, and popping up the Blue screen of
My amd graphics card m230 in my laptop keeps crashing after i update its new driver from amd site...pls help me to solve this
When I update my laptops drivers, the screen freezes every couple seconds
Intel says update video driver. Acer says no and doesn't provide an alternative. Fix? [Screenshots]
Updating graphics drivers?
new HP laptop BSOD when updating graphics driver
Hd Graphics 5500. Can't update drivers...
AMD Graphics Driver Update question
GTX 960m not detected after doing driver update through Nvidia Geforce Experience
Acer Aspire E1-572G laptop not shutting down completely after graphics driver update
Weird boot event occurs when updating AMD gpu drivers on Dell Inspiron 5545
My Asus X555UB won't wake up properly after I updated some drivers
My display driver AMD keeps crashing and recovering since i updated my laptop to windows 10
My Windows 10 cant download my Graphic card driver!
Black screen after updating nvidia driver on laptop
Graphics card Driver Installs but GeForce Experience still says there's an update there.
Laptop GPU upgrade done, unable to update drivers (MSI GT70 0NE from GTX 675M to GTX 880M)
Sony Vaio GPU Driver Updates(Old Laptop)

ASK THE COMMUNITY