Kenwood KA 400

[donpix]

HI,
This amp is circa 1980 (?) and requires new push switches used for selecting the various features like phono, tuner ect. There are no numbers I can see on the switches or in the service manual. They may have been used in other amps as well like the KA 300 but the number is eluding me. If someone can tell me the part number or a substitute at least it would be truly appreciated.

 

[americanaudiophile]

Here is a link to the service manual
http/elektrotanya.com/kenwood_ka-400_sch.pdf/download.html
Extremely unlikely that there is a replacement switch assembly available. You might be able to clean them if they are not sealed. You would need to get the correct cleaner for switches. Caig products are very good for this.

 

[donpix]

Here is a link to the service manual
http/elektrotanya.com/kenwood_ka-400_sch.pdf/download.html
Extremely unlikely that there is a replacement switch assembly available. You might be able to clean them if they are not sealed. You would need to get the correct cleaner for switches. Caig products are very good for this.

Thanks. The switches can be removed independently so there is no need to replace the entire bank although I do need three of the five. The switch has collapsed internally and not really a cleaning issue. As stated above, the part number is not in the service manual. Cheers