Solved! Keyboard doesn't work

[michellepanicola13]

My laptop key card will only type numbers, same with the touch screen. I attached an external keyboard and I can't get that to work at all. What should I do?

 

[webworkings]

If you can't get both the attached keyboard and an external one to work at all, and you have tried the following to make it work, then I would suggest you take it to a tech to have it repaired, or contact the manufacturer if it is still under warranty.

Try the following...

1. Uninstall the keyboard driver.
2. Reboot the computer (without reinstalling the driver).
3. When it restarts, it should reinstall the driver on its own.

If this doesn't work, you may wish to try connecting/reconnecting an external keyboard and see if it works fine. If it does, then it could be the keys themselves that are the issue.

Additionally, if your device uses one, you may want to try updating the Synaptics Driver if the above doesn't help.

You may also want to check the device for malware, viruses, etc., which can interfere with normal operation. Loading in "Safe Mode" will give you a better idea if the problem is actually software related (virus, etc.). If things work in "Safe Mode", then there is something fishy likely on the device.

How to enter "Safe Mode" when booting the computer.

In Windows 8 and 10...

As your computer restarts, press F8 (possibly a few times) to enter "Safe Mode"

a. Press the "F4" key to Enable "Safe Mode".
(The computer will then start in "Safe Mode" with a minimal set of drivers and services.)

b. Press the "F5" key to Enable "Safe Mode" with Networking.
( Once "Safe Mode" with Networking starts, Windows is in Safe Mode, with additional network and services for accessing the Internet and other computers on your network.)

c. Press the "F6" key to Enable "Safe Mode" with Command Prompt.
(In "Safe Mode" with "Command Prompt" starts Windows in Safe Mode, with a Command Prompt window instead of the Windows interface. This option is mostly only used by IT professionals.)

Now sign in to the computer with your account name and password. (If you have one set.) When you are finished troubleshooting, you can exit "Safe Mode" restarting your computer.


In Windows 7/Vista/XP...

1. Immediately after turning on the computer, or restarting it (usually after you hear your computer beep), tap the F8 key, repeatedly, in 1 second intervals.

2. The computer will then display hardware information and run a memory test.

3. Next the "Advanced Boot Options" menu will appear.

4. In the "Advanced Boot Options" menu use the arrow keys to select "Safe Mode" or "Safe Mode with Networking" and press ENTER.