C cemiller45 Prominent Jun 13, 2017 1 0 510 Jun 13, 2017 #1 Bought a refurbished Sony STRDH550 5.2 Channel 4K AV Receiver. I have KLH Model 20 4 ohm speakers. Back of receiver says 6-16 ohm speakers. Will this work?
Bought a refurbished Sony STRDH550 5.2 Channel 4K AV Receiver. I have KLH Model 20 4 ohm speakers. Back of receiver says 6-16 ohm speakers. Will this work?
Solution A A americanaudiophile Jun 15, 2017 It might cause the receiver to go into protection or maybe even blow. The warranty on a refurb might not cover that. Try it at your own risk. I would suggest you get 2 four ohm 20-100 watt resistors and wire them in series with the plus lead to each speaker raising the impedance to 8 ohms https/www.amazon.com/uxcell-Mounted-Aluminum-Wirewound-Resistors/dp/B008ML0LE4/ref=sr_1_fkmr0_1?s=industrial&ie=UTF8&qid=1497562255&sr=1-1-fkmr0&keywords=4+ohm+non+inductive+20+watt+resistors
It might cause the receiver to go into protection or maybe even blow. The warranty on a refurb might not cover that. Try it at your own risk. I would suggest you get 2 four ohm 20-100 watt resistors and wire them in series with the plus lead to each speaker raising the impedance to 8 ohms https/www.amazon.com/uxcell-Mounted-Aluminum-Wirewound-Resistors/dp/B008ML0LE4/ref=sr_1_fkmr0_1?s=industrial&ie=UTF8&qid=1497562255&sr=1-1-fkmr0&keywords=4+ohm+non+inductive+20+watt+resistors
A americanaudiophile Titan Aug 27, 2008 14,933 147 103,240 Jun 15, 2017 Solution #2 It might cause the receiver to go into protection or maybe even blow. The warranty on a refurb might not cover that. Try it at your own risk. I would suggest you get 2 four ohm 20-100 watt resistors and wire them in series with the plus lead to each speaker raising the impedance to 8 ohms https/www.amazon.com/uxcell-Mounted-Aluminum-Wirewound-Resistors/dp/B008ML0LE4/ref=sr_1_fkmr0_1?s=industrial&ie=UTF8&qid=1497562255&sr=1-1-fkmr0&keywords=4+ohm+non+inductive+20+watt+resistors Upvote 0 Downvote Solution
It might cause the receiver to go into protection or maybe even blow. The warranty on a refurb might not cover that. Try it at your own risk. I would suggest you get 2 four ohm 20-100 watt resistors and wire them in series with the plus lead to each speaker raising the impedance to 8 ohms https/www.amazon.com/uxcell-Mounted-Aluminum-Wirewound-Resistors/dp/B008ML0LE4/ref=sr_1_fkmr0_1?s=industrial&ie=UTF8&qid=1497562255&sr=1-1-fkmr0&keywords=4+ohm+non+inductive+20+watt+resistors