Logitech Gaming Software Surround Sound

[JustAwesome]

Is there any way to enable surround sound with the Logitech G35 withing the software. My manual switch broke and I really need to know.

 

[rgd1101]

MERGED QUESTION
Question from JustAwesome : "Logitech Gaming Software Question"

So I recently broke my surround sound switch on my Logitech G35 headset. I was looking for an option to enable/disable surround sound within the LGS (logitech gaming software) but couldn't find it. If anyone could tell me how to do this it would be much appreciated.

P.S. If you know how to take apart the headset and fix it that would also be appreciated.

 

[JustAwesome]

I found a way to switch the headset mode from surround to stereo by taking apart the headset. If you take apart the ear cup that contains the switch you can manually switch it and then put the ear cup together. There will be screws behind the leather pads that you have to unscrew (note they do not completely come out). Then you have to unscrew the part below that which covers the circuit behind it. Then unscrew the circuit and take it out of the ear cup. Please note that the volume wheel is supposed to be screwed onto the circuit before you reinsert it. You should see (in the bottom left of the board) a small silver-like housing. You can move this either up or down by taking a screwdriver and moving it over.

 

[TripleMean]

I found a way to switch the headset mode from surround to stereo by taking apart the headset. If you take apart the ear cup that contains the switch you can manually switch it and then put the ear cup together. There will be screws behind the leather pads that you have to unscrew (note they do not completely come out). Then you have to unscrew the part below that which covers the circuit behind it. Then unscrew the circuit and take it out of the ear cup. Please note that the volume wheel is supposed to be screwed onto the circuit before you reinsert it. You should see (in the bottom left of the board) a small silver-like housing. You can move this either up or down by taking a screwdriver and moving it over.

THANK YOU! Struggled so long with this. You are my hero