My ellipsis tablet keeps flashing the power up screen but wont power up

Jul 25, 2018
2
0
10
0
I charged my tablet overnight, when I turned it on it would get to the ellipsis power up screen but does not power all the way up. What can I do?
 
A "Hard Reset" and "Safe Mode" are two totally different things. A "Hard Reset" will totally wipe the device and make it back to the way was originally. "Safe Mode" will leave it as is, but start up the device without allowing anything on it to load, other than what the phone deems necessary. This is so you can see if it loads OK in that mode, then you know there is something on the device that is the problem. Bad app, virus, malware, etc. Below are the instructions on how both are done.

To get into "Safe Mode" please do the following.

1. First turn off the tablet.

2. Next press and hold "Power" until you see the manufacturers logo on the screen, then release the power button.

3. "Quickly" press "Volume Down" and hold it for few seconds until you see the message "Safe mode: ON" or something similar.

4. If you wanted disable it, simply repeat the steps above, and you should see "Safe Mode: OFF" rather than on.


NOTE: Doing this will clear 'all' the data on your tablet, so it is suggested you not choose this option unless you have to, or aren't worried about losing anything on the device.

Be sure you back up any data you want to keep, to a computer or cloud account, before doing the reset.


To "Hard Reset" the tablet...

1. Make sure that the tablet is actually powered off.

2. Remove your SD card, if there is one in the device.

3. Press the "Power" and the "Volume Up" buttons, together, until you see the start-up logo on the screen.

4. Once you can see the logo, release the buttons and allow the device to enter the "System Recovery Mode".

5. Next use "Volume Down" button to get to the "wipe data/factory reset" option When in recovery mode the "Volume Up" and "Volume Down" buttons are how to can navigate and highlight what option you need.

6. Once you have selected the "wipe data/factory reset", press the "Power" button to select that option.

7. On the following screen, repeatedly press the "Volume Down" button until the "Yes - delete all user data" option is what is selected.

8. Then press the "Power" button to hard reset the tablet.

9. If you took your SD card out in step 2, when the device is up and running again, reinsert the SD card.
 
A "Hard Reset" and "Safe Mode" are two totally different things. A "Hard Reset" will totally wipe the device and make it back to the way was originally. "Safe Mode" will leave it as is, but start up the device without allowing anything on it to load, other than what the phone deems necessary. This is so you can see if it loads OK in that mode, then you know there is something on the device that is the problem. Bad app, virus, malware, etc. Below are the instructions on how both are done.

To get into "Safe Mode" please do the following.

1. First turn off the tablet.

2. Next press and hold "Power" until you see the manufacturers logo on the screen, then release the power button.

3. "Quickly" press "Volume Down" and hold it for few seconds until you see the message "Safe mode: ON" or something similar.

4. If you wanted disable it, simply repeat the steps above, and you should see "Safe Mode: OFF" rather than on.


NOTE: Doing this will clear 'all' the data on your tablet, so it is suggested you not choose this option unless you have to, or aren't worried about losing anything on the device.

Be sure you back up any data you want to keep, to a computer or cloud account, before doing the reset.


To "Hard Reset" the tablet...

1. Make sure that the tablet is actually powered off.

2. Remove your SD card, if there is one in the device.

3. Press the "Power" and the "Volume Up" buttons, together, until you see the start-up logo on the screen.

4. Once you can see the logo, release the buttons and allow the device to enter the "System Recovery Mode".

5. Next use "Volume Down" button to get to the "wipe data/factory reset" option When in recovery mode the "Volume Up" and "Volume Down" buttons are how to can navigate and highlight what option you need.

6. Once you have selected the "wipe data/factory reset", press the "Power" button to select that option.

7. On the following screen, repeatedly press the "Volume Down" button until the "Yes - delete all user data" option is what is selected.

8. Then press the "Power" button to hard reset the tablet.

9. If you took your SD card out in step 2, when the device is up and running again, reinsert the SD card.
 
Thread starter Similar threads Forum Replies Date
I Android Tablets 2
Rsrafiner Android Tablets 1
S Android Tablets 1
ptt1404 Android Tablets 5
X Android Tablets 3
C Android Tablets 1
N Android Tablets 1
M Android Tablets 4
A Android Tablets 2
R Android Tablets 1
S Android Tablets 4
D Android Tablets 1
D Android Tablets 1
K Android Tablets 1
D Android Tablets 2
W Android Tablets 1
K Android Tablets 1
S Android Tablets 1
Z Android Tablets 1
R Android Tablets 1

ASK THE COMMUNITY