my samsung plasma PN64E70000- pop, no picture

Paul8974

Commendable
Mar 25, 2016
1
0
1,510
my plasma , which is hooked up to a media center mad ea pop sound when it was turned on & now there is no picture. the red light flashes about 6 times then goes blank. the sound is shut off because of external speakers so i do not know if the sound is still working. I pulled the cover off & found nothing out of the ordinary. the logic board green light flashes, long flashes, not short like a code.
i unpluged the y sustain, no change, i unplugged the z sustain, & the logic board does not light up; I am at my wits end, please help
 
Solution
Could be a power supply problem since the operating voltage of the plasma panel would be higher then the voltage for the other boards. Check with www.shopjimmy.com
They carry replacement boards and are very helpful.