Need firmware vt902cb for my tablet

[sadkiayoub]

tablet view tab vt902cb have a wite screan after a bad flash.
I need original firmware pls.
cpu mtk8312v
elink MR900v2 -20140111
http://s017.radikal.ru/i412/1509/04/76c0b50123fe.jpg

HARD REST dont work after bad flash
SCREEN WITe!!!!!
I dont find original manufactory ;is like BRANDT,ALPS with cpu MTK8312v ID mr900 DDR3-512mb..

 

[webworkings]

You should be able to "Hard Reset" your device and that should allow it to go back to the original OS. If that doesn't do it, the only other way I can think of is to search the net for the original firmware. You might find it through the original manufacturer.


NOTE: Doing a "Hard Reset" will clear the data on your phone, so it is suggested you not choose this option unless you have to, or aren't worried about losing anything on the phone.

Be sure you back up any data you want to keep, to a computer or cloud account, before doing the reset.



To "Hard Reset" the tablet...

1. Make sure that the tablet is actually powered off.

2. Press the "Power" and the "Volume Up" buttons, together, until you see the start-up logo on the screen.

3. Once you can see the logo, release the buttons and allow the device to enter the "System Recovery Mode".

4. Next use "Volume Down" button to get to the "wipe data/factory reset" option When in recovery mode the "Volume Up" and "Volume Down" buttons are how to can navigate and highlight what option you need.

5. Once you have selected the "wipe data/factory reset", press the "Power" button to select that option.

6. On the following screen, repeatedly press the "Volume Down" button until the "Yes - delete all user data" option is what is selected.

7. Then press the "Power" button to hard reset the tablet.