PDF printed as a blank page

[prootsy65]

I have created a PDF from a CAD drawing but when I try to print it, it prints as a blank page

 

[hang-the-9]

Try setting the print options to "print as image".

 

[prootsy65]

Hi All.
I have found a solution to this see below.


Within AutoCad, go to "Options". Look in the "System" tab (should be the fifth one tab). The second group down on the left side is the "Current Pointing Device" box. It's probably set to "Wintab Compatible Digitizer ADI 4.2 - by Autodesk". Change that to "Current System Pointing Device". Then hit "OK" at the bottom