Solved! problem oppo 3007

[voltraxkiller]

■ hello!, my phone is oppo 3007 . It cannot turn on after format even i'm put charge and it still wont too.can anyone help please.

 

[webworkings]

Try the following and see if it will turn on.

1. Remove the battery.
2. Press and hold the "Power" button for 20 seconds.
3. Now put the battery back in.
4. Plug it in to charge and allow it to fully charge before turning it on.

If this doesn't help, then test the charger cord to see if it is good. Either try your cord in another device, or try another devices cord on your device.

Should that not be the problem, then check the battery to see if it needs replacing.

NOTE: Yes, I know some phone batteries are not so easy to get to, on some devices. In such a case, make sure that your phone is not under warranty still before you try opening it up yourself. If it is under warranty, then contact the manufacturer first.

 

[voltraxkiller]

When i put the batteries back in and let it charge..how long i will wait it..

 

[webworkings]

I would wait for a full charge. So give it a few hours. Once charged try again. If that doesn't work, or the battery doesn't actually charge, then you know you have to look at the charger and the battery as possibly needing replacement.

 

[kliff.keeper]

what if the battery is built in?how to do it?

 

[webworkings]

I have not opened that particular device, so you will have to check the manual for it or see if there is a video online to walk you through opening it up. Just be very careful.

However, if it is under warranty, do not open it yourself. That would void the warranty. In that case, contact the manufacturer.

 

[kliff.keeper]

For me this is the best solution to every oppo users..go to your nearest oppo service center.then you will thank me later.flashing is dangerous if you dont know the exact firmware.

 

[webworkings]

No one said anything about flashing.