Sanyo DP42740 no sound through HDMI connection with Blu-Ray

CamaroLovr

Estimable
Dec 2, 2015
1
0
4,510
0
Hey guys.
So I just bought a Samsung BD-J5700 blu-ray player to connect to my Sanyo DP42740 in order to use netflix. Bought a new Monster HDMI cable to connect the two. Well, everything comes through with video but no sound and the phrase "Please use audio 3 input for dvi connection" comes on the screen. Is this just simply a compatibility issue where I need to just use a digital to analog RCA converter to run the audio or is the tv audio circuit fried and it should be working with the HDMI? If you can help I owe ya a beer!
Thanks!!
 
Your TV may have a setting to allow you to use one of the HDMI inputs for a DVI connection which doesn't support audio and so requires a separate audio connection. If you go into the TV menus there should be a place to set that HDMI input back to HDMI.
Try the other HDMI Input as that may be set to HDMI.
 
Your TV may have a setting to allow you to use one of the HDMI inputs for a DVI connection which doesn't support audio and so requires a separate audio connection. If you go into the TV menus there should be a place to set that HDMI input back to HDMI.
Try the other HDMI Input as that may be set to HDMI.
 
Thread starter Similar threads Forum Replies Date
V Streaming Video & TVs 1
D Streaming Video & TVs 1
V Streaming Video & TVs 1
P Streaming Video & TVs 2
R Streaming Video & TVs 2
R Streaming Video & TVs 1
A Streaming Video & TVs 3
J Streaming Video & TVs 1
T Streaming Video & TVs 2
L Streaming Video & TVs 1
T Streaming Video & TVs 1
R Streaming Video & TVs 4
S Streaming Video & TVs 2
J Streaming Video & TVs 1
P Streaming Video & TVs 1
L Streaming Video & TVs 1
L Streaming Video & TVs 1
P Streaming Video & TVs 3
S Streaming Video & TVs 2
M Streaming Video & TVs 3

ASK THE COMMUNITY