Screen Stays blackout

altresjimanda

Prominent
Nov 19, 2017
1
0
510
0
My frontech Desktop Stays black...First it will shows up but after log in it stays black ...Please help Me I have tried ctrl+alt+del but did'nt work
 
Try these...


Option 1 ...

1. First, while the computer is off, connect an external monitor.
2. Next turn on the computer and allow it to fully load.
3. Once loaded, press the "Windows Key" + "P" to open the "Easy Display Switcher".
4. In here select "Computer only".
5. Now shut down the computer and disconnect the external monitor.
5. Disconnect the external monitor
6. And finally restart the computer.


Option 2 ...

Make sure you wait until the computer would be fully loaded before trying this, and not try it right away like you would to say get into BIOS. This needs you to actually be where you would be when Windows Explorer loads.

1. Press "Shift" repeatedly until the "sticky keys" window shows up.

2. Now click the the link there that will lead to the "Ease of Access Center".

3. Next click "Cancel" on the the bottom right corner of the "Set Up Sticky Keys" window.

4. From here you want to click "Control Panel" on the upper left corner (it should be right beside the "Make Your Computer Easier to Use" title.

5. Locate the "Computer Settings" menu and then choose the "Recovery" icon (make sure that your view of this is by either large or small icons for easier access).

6. Now click and open "System Restore".

7. Here you want to click next on the bottom right corner (a few times) until the button "Finish" shows up and then click it. (Just follow everything prompt that the window says which will lead you to recovering your previous system, in a certain time.

8. The computer will now do the work it needs to and then reboot.


If that doesn't work, you can try the following...

You can also try doing the Ctrl+Alt+Delete and see if you can get "Task Manager" to show.


If the "Task Manager" windows shows, then choose "New Task" and then type in EXPLORER. If the desktop shows up then you need to go into "Start", "Programs", then "Accessories" and finally "Command Prompt". (Or you can do a search for CMD.)

Make sure you load the "Command Prompt" with Administrator access. Then when it loads type in....

SFC /SCANNOW

It will do a file check.

To learn more about "SFC" visit this link at Microsoft... https://support.microsoft.com/en-us/kb/929833
 
Try these...


Option 1 ...

1. First, while the computer is off, connect an external monitor.
2. Next turn on the computer and allow it to fully load.
3. Once loaded, press the "Windows Key" + "P" to open the "Easy Display Switcher".
4. In here select "Computer only".
5. Now shut down the computer and disconnect the external monitor.
5. Disconnect the external monitor
6. And finally restart the computer.


Option 2 ...

Make sure you wait until the computer would be fully loaded before trying this, and not try it right away like you would to say get into BIOS. This needs you to actually be where you would be when Windows Explorer loads.

1. Press "Shift" repeatedly until the "sticky keys" window shows up.

2. Now click the the link there that will lead to the "Ease of Access Center".

3. Next click "Cancel" on the the bottom right corner of the "Set Up Sticky Keys" window.

4. From here you want to click "Control Panel" on the upper left corner (it should be right beside the "Make Your Computer Easier to Use" title.

5. Locate the "Computer Settings" menu and then choose the "Recovery" icon (make sure that your view of this is by either large or small icons for easier access).

6. Now click and open "System Restore".

7. Here you want to click next on the bottom right corner (a few times) until the button "Finish" shows up and then click it. (Just follow everything prompt that the window says which will lead you to recovering your previous system, in a certain time.

8. The computer will now do the work it needs to and then reboot.


If that doesn't work, you can try the following...

You can also try doing the Ctrl+Alt+Delete and see if you can get "Task Manager" to show.


If the "Task Manager" windows shows, then choose "New Task" and then type in EXPLORER. If the desktop shows up then you need to go into "Start", "Programs", then "Accessories" and finally "Command Prompt". (Or you can do a search for CMD.)

Make sure you load the "Command Prompt" with Administrator access. Then when it loads type in....

SFC /SCANNOW

It will do a file check.

To learn more about "SFC" visit this link at Microsoft... https://support.microsoft.com/en-us/kb/929833
 
Thread starter Similar threads Forum Replies Date
jasonkariuki98 Laptop Tech Support 1
Bojan1 Laptop Tech Support 1
D Laptop Tech Support 1
D Laptop Tech Support 1
M Laptop Tech Support 1
J Laptop Tech Support 1
R Laptop Tech Support 1
H Laptop Tech Support 7
A Laptop Tech Support 3
B Laptop Tech Support 1
A Laptop Tech Support 1
T Laptop Tech Support 1
E Laptop Tech Support 1
E Laptop Tech Support 1
L Laptop Tech Support 1
F Laptop Tech Support 2
J Laptop Tech Support 4
P Laptop Tech Support 1
I Laptop Tech Support 1
S Laptop Tech Support 1
Similar threads
Solved! I spilled water on my laptop and now it is stuck on a startup loop while playing this annoying tune everytime it turns on. The screen stays off though
Solved! My asus laptop turns on, but the screen stays black
Solved! My Toshiba labtop had went to black screen and would show erra now it stays black you can here it come on but the scene stays
Acer Asprice V Nitro - Screen only stays on when i press the keyboard
Solved! there was some lines over my laptop screen i turn it off and when i turn it on the screen stays black.
Solved! My Toshiba Satellite turns on but screen stays black
Solved! my Lenova laptop goes to sleep mode but screen light still stays on
Solved! Lenovo Thinkpad Edge turns on, but screen stays black
Laptop display stays blank for infity
Solved! turning on but shutting down immediately screen stay black ...when plug in charge turn it in only. . without plug in it dont e
Solved! I just got a new a.c. adaptor for my acer laptop but the blue light just blinks while the orange light stays steady
the screen on my Acer Aspire laptop doesnt work, its just stays black
Acer Aspire E14 touch laptop screen stays black/blinking
My gateway turn on but screen stay black
My dell windows 7 will not boot up it turns on and screen stays black
My Toshiba will power up, all lights come on, fan runs, no a/C bartery to remove, but the screen stays black
I have an hp15-f233wm. Screen stays black when I power on and caps lock blinks twice slowly followed by 2 fast blinks. What is
hp touch screen laptop with core i3 Intel processor cap's lock key blinking f12 amber light stays on and external screen is bl
My laptop screen won't come on and the charger light stay on red why? And can I get it fix
Acer e1 552 ,starts up but screen stays black?? Running Windows 10..any ideas?

ASK THE COMMUNITY