• Check out all the best Amazon Prime Day deals 2021 here!

Setting up an older System

Golding

Estimable
Oct 20, 2014
3
0
4,510
0
I was recently searching through some of my dads old gear and managed to come across an old Technics SU-8011 Amplifier and set it up with the Tuner and Speakers I found it with.

It works fine, but I was planning on hooking it up to either my pc or phone aswell. Ive read that I would require a 3mm to RAC but with this being a system from around 1979, I was wondering if I would need to take any additional steps in order to set it up properly such as a DAC etc.

Any help with this would be appreciated, Thanks again.

The AMP :http://audio-database.com/TechnicsPanasonic/amp/su-8011-e.html
 

kanewolf

Judicious
Moderator


You can try the headphone jack. Start with the volume all the way down on the phone and on the amp. You will have to figure out the correct signal level....
 
Thread starter Similar threads Forum Replies Date
T Audio 2
RavenXxXx Audio 1
ajinkys Audio 0
R Audio 1
Synthipedia Audio 0
L Audio 1
F Audio 12
J Audio 4
C Audio 2
C Audio 1
Brown66 Audio 3
JLB00n Audio 0
fd7010 Audio 1
Quabbe Audio 2
M Audio 3
A Audio 2
njoj Audio 0
Vexzionel Audio 3
C Audio 1
FreshFactor Audio 1

ASK THE COMMUNITY