Sharp aquos lcd no picture

Zowen89

Commendable
Sep 19, 2016
1
0
1,510
I have a 60" lcd sharp aquos.
The screen recently went black. The standby and power lights both work and went peered on the power light stays a solid blue. Tried the factory reset and it didn't work. Would like to fix it myself rather than spend a pile of money on a new TV. Any help input is greatly appreciated.
 
Solution
try a "forced reset" (something like holding channel up and volume down, while plugging in to power... not sure of the sequence but search the net). Should force the set into service mode and cause the backlights to come on. Otherwise, try disconnecting the cables from the tcon card and see if what happens with the display... the side with cable disconnected (tcon should have two) should show up white. You can go from there depending on what happens. Are any of the lights flashing a "code"?

budwich

Honorable
Oct 30, 2015
205
0
11,160
try a "forced reset" (something like holding channel up and volume down, while plugging in to power... not sure of the sequence but search the net). Should force the set into service mode and cause the backlights to come on. Otherwise, try disconnecting the cables from the tcon card and see if what happens with the display... the side with cable disconnected (tcon should have two) should show up white. You can go from there depending on what happens. Are any of the lights flashing a "code"?
 
Solution