Hey guys, I was wondering if anyone would possibly know the solution to my broken Sony LCD TV.
When I turn on the TV screen, the screen displays for about a second, and then it goes blank. Here is a video of my TV doing this:
https/www.youtube.com/watch?v=nafRqIcPVMk
Notice how the display actually shows for about a second, then all of a sudeen the screen goes "blank."
A few things:
-When the screen goes blank, it’s actually not “off.” The green light is still on, and when I play around with scrolling with the channels using the remote, when I turn it off and turn it back on, I see that the channels change. So clearly, the TV still accepts input from my remote on the TV buttons itself. But it’s just the display that’s not displaying correctly:
-This problem occurred right before I connected the Playstation 3 HDMI cable to the TV. I’m not sure but the PS3 could have possibly messed up the settings
-Here is more information about the TV, the model number and stuff:
Model number: Sony KDL-32ML130
Anyone know the solution or what the actual problem is? Hopefully I can fix it. I’ve tried resetting the TV to default settings, but that didn’t work. I also tried calling Sony, but they couldn’t find a solution and they suggested to get someone to look at it, but I’m sure it would far too much money for an expensive repair. If I can’t find a solution, then I’ll most likely just buy a new LED/LCD TV, because it’s cheaper than repairing this one.
When I turn on the TV screen, the screen displays for about a second, and then it goes blank. Here is a video of my TV doing this:
https/www.youtube.com/watch?v=nafRqIcPVMk
Notice how the display actually shows for about a second, then all of a sudeen the screen goes "blank."
A few things:
-When the screen goes blank, it’s actually not “off.” The green light is still on, and when I play around with scrolling with the channels using the remote, when I turn it off and turn it back on, I see that the channels change. So clearly, the TV still accepts input from my remote on the TV buttons itself. But it’s just the display that’s not displaying correctly:
-This problem occurred right before I connected the Playstation 3 HDMI cable to the TV. I’m not sure but the PS3 could have possibly messed up the settings
-Here is more information about the TV, the model number and stuff:
Model number: Sony KDL-32ML130
Part Number:0027242719989
General
TV type LCD TV
Screen size 32.0 in
Viewing angle 178 degrees
Viewing angle (vertical) 178 degrees
Video
Technology TFT active matrix
Native resolution 1366 x 768
Resolution 720p
Aspect ratio 16:9
Response time (ms) 8.0 ms
Progressive Scan Progressive scanning (line doubling)
Widescreen Widescreen
Widescreen modes Full,
Normal,
Panorama,
Wide
Contrast ratio 1000:1
TV Tuner
TV tuner presence Yes
HDTV Tuner Yes
Tuner qty 1x analog/digital combo
Digital TV tuner ATSC
Secondary audio program (SAP) Yes
Connectivity
HDMI ports qty 2.0
PC interface VGA (HD-15)
Video interface HDMI,
Component,
Composite,
S-Video
Remote Control
Type Remote control
Second remote control type None
Stands & Mounts
Stand included Included
Stand design Tabletop
Power
Power device Power supply - Internal
Dimensions & Weight
Dimensions (WxDxH) - Without stand
Weight 24.3 lbs
Sustainability
ENERGY STAR Qualified Yes
Anyone know the solution or what the actual problem is? Hopefully I can fix it. I’ve tried resetting the TV to default settings, but that didn’t work. I also tried calling Sony, but they couldn’t find a solution and they suggested to get someone to look at it, but I’m sure it would far too much money for an expensive repair. If I can’t find a solution, then I’ll most likely just buy a new LED/LCD TV, because it’s cheaper than repairing this one.