Starup repair wont work

Well what happened prior to this. What was the initial cause/incident? And have you tried starting the laptop in "Safe Mode" to see if it will load?

How to enter "Safe Mode" when booting the computer.

In Windows 8 and 10...

As your computer restarts, press F8 (possibly a few times) to enter "Safe Mode"

a. Press the "F4" key to Enable "Safe Mode".
(The computer will then start in "Safe Mode" with a minimal set of drivers and services.)

b. Press the "F5" key to Enable "Safe Mode" with Networking.
( Once "Safe Mode" with Networking starts, Windows is in Safe Mode, with additional network and services for accessing the Internet and other computers on your network.)

c. Press the "F6" key to Enable "Safe Mode" with Command Prompt.
(In "Safe Mode" with "Command Prompt" starts Windows in Safe Mode, with a Command Prompt window instead of the Windows interface. This option is mostly only used by IT professionals.)

Now sign in to the computer with your account name and password. (If you have one set.) When you are finished troubleshooting, you can exit "Safe Mode" restarting your computer.


In Windows 7/Vista/XP...

1. Immediately after turning on the computer, or restarting it (usually after you hear your computer beep), tap the F8 key, repeatedly, in 1 second intervals.

2. The computer will then display hardware information and run a memory test.

3. Next the "Advanced Boot Options" menu will appear.

4. In the "Advanced Boot Options" menu use the arrow keys to select "Safe Mode" or "Safe Mode with Networking" and press ENTER.
 
Well what happened prior to this. What was the initial cause/incident? And have you tried starting the laptop in "Safe Mode" to see if it will load?

How to enter "Safe Mode" when booting the computer.

In Windows 8 and 10...

As your computer restarts, press F8 (possibly a few times) to enter "Safe Mode"

a. Press the "F4" key to Enable "Safe Mode".
(The computer will then start in "Safe Mode" with a minimal set of drivers and services.)

b. Press the "F5" key to Enable "Safe Mode" with Networking.
( Once "Safe Mode" with Networking starts, Windows is in Safe Mode, with additional network and services for accessing the Internet and other computers on your network.)

c. Press the "F6" key to Enable "Safe Mode" with Command Prompt.
(In "Safe Mode" with "Command Prompt" starts Windows in Safe Mode, with a Command Prompt window instead of the Windows interface. This option is mostly only used by IT professionals.)

Now sign in to the computer with your account name and password. (If you have one set.) When you are finished troubleshooting, you can exit "Safe Mode" restarting your computer.


In Windows 7/Vista/XP...

1. Immediately after turning on the computer, or restarting it (usually after you hear your computer beep), tap the F8 key, repeatedly, in 1 second intervals.

2. The computer will then display hardware information and run a memory test.

3. Next the "Advanced Boot Options" menu will appear.

4. In the "Advanced Boot Options" menu use the arrow keys to select "Safe Mode" or "Safe Mode with Networking" and press ENTER.
 
Thread starter Similar threads Forum Replies Date
A Laptop Tech Support 3
M Laptop Tech Support 2
SnoggyTheBear Laptop Tech Support 0
C Laptop Tech Support 4
warriorninja Laptop Tech Support 5
cesc4 Laptop Tech Support 14
RandomMan25 Laptop Tech Support 0
JackGer8 Laptop Tech Support 0
philly.a Laptop Tech Support 1
HiiamRumman Laptop Tech Support 0
E Laptop Tech Support 1
A Laptop Tech Support 1
D Laptop Tech Support 1
KingECH Laptop Tech Support 7
ksculland Laptop Tech Support 1
Oldbiddy66 Laptop Tech Support 0
W Laptop Tech Support 2
D Laptop Tech Support 1
M Laptop Tech Support 0
R Laptop Tech Support 1

ASK THE COMMUNITY

TRENDING THREADS