Question TDA2822 Audio Amplifier Circuit Problem

May 8, 2021
2
0
10
0
Good day, all
I would like to ask about an amplifier circuit I assembled today.
I used the TDA2822 and connected it to two 1 inch 8 ohm speakers, and a 3.6v lithium battery and connected it to my PC/Mobile.
But the sound is very loud and noisy when I turn down the stereo potentiometer (It works fine only on the highest resistance value) , so is it the 10k potentiometer (should I use 100K?) or is it lack of voltage? and if so should I use another amp, circuit that works better with 3.6v battery and what do suggest? or is it something else like capacitors (I used 1000uF instead of 470)

Any suggestion? Thanks in advance.☺

TDA2822 Datasheet as Reference: https://www.apogeeweb.net/circuitry/tda2822-stereo-amplifier.html
 
Thread starter Similar threads Forum Replies Date
TheMuppetMan Audio 0
D Audio 0
C Audio 0
fiachrab Audio 1
W Audio 3
P Audio 2
R Audio 0
Sentyee Audio 0
DakiMC Audio 1
Z Audio 3
komazumi Audio 0
T Audio 0
W Audio 2
xsurv Audio 0
B Audio 2
kk897 Audio 1
GarethLittle Audio 0
G Audio 0
tniemeyerx Audio 1
Alec S Audio 1

ASK THE COMMUNITY

TRENDING THREADS