Telstar 6 (Intelsat Americas 6) - need to align dish

[Jim]

Archived from groups: alt.video.satellite.mpeg-dvb (More info?)

I had been using Bloomberg on Transponder 5 to align the dish, and
somehow my store position on Telstar 6 got screwed up, and I would
like to realign the dish (It has HH rotor) on T6 in case Bloomberg
comes back on T5.

I tried T27 but the symbol rate given for them in the Lyngsat chart is
only 1900 and my Satwork receiver only goes down to 2000, which I
tried, no luck.

can anyone verify if Bloomberg on T5 is indeed missing, and is there
any other transponder I could use to lock in that orbit position in
the receiver in case Bloomberg comes back again?

Thank you for your help.

Jim

 

[Jim]

Archived from groups: alt.video.satellite.mpeg-dvb (More info?)

I found it (DUH!!!!!) I see University Network was FTA and they have
a good signal. Sorry for any inconvenience. Now to see if Bloomberg
is still amongst the missing.

Jim







On Mon, 13 Dec 2004 08:27:10 -0800, Jim <wdxp@cox.net> wrote:

>I had been using Bloomberg on Transponder 5 to align the dish, and
>somehow my store position on Telstar 6 got screwed up, and I would
>like to realign the dish (It has HH rotor) on T6 in case Bloomberg
>comes back on T5.
>
>I tried T27 but the symbol rate given for them in the Lyngsat chart is
>only 1900 and my Satwork receiver only goes down to 2000, which I
>tried, no luck.
>
>can anyone verify if Bloomberg on T5 is indeed missing, and is there
>any other transponder I could use to lock in that orbit position in
>the receiver in case Bloomberg comes back again?
>
>Thank you for your help.
>
>Jim

 

[Guest]

Archived from groups: alt.video.satellite.mpeg-dvb (More info?)

did you find bloomberg?


"Jim" <wdxp@cox.net> wrote in message
news:9birr01jdt94qobhf4uonh6tphj6hk8rri@4ax.com...
> I found it (DUH!!!!!) I see University Network was FTA and they have
> a good signal. Sorry for any inconvenience. Now to see if Bloomberg
> is still amongst the missing.
>
> Jim
>
>
>
>
>
>
>
> On Mon, 13 Dec 2004 08:27:10 -0800, Jim <wdxp@cox.net> wrote:
>
> >I had been using Bloomberg on Transponder 5 to align the dish, and
> >somehow my store position on Telstar 6 got screwed up, and I would
> >like to realign the dish (It has HH rotor) on T6 in case Bloomberg
> >comes back on T5.
> >
> >I tried T27 but the symbol rate given for them in the Lyngsat chart is
> >only 1900 and my Satwork receiver only goes down to 2000, which I
> >tried, no luck.
> >
> >can anyone verify if Bloomberg on T5 is indeed missing, and is there
> >any other transponder I could use to lock in that orbit position in
> >the receiver in case Bloomberg comes back again?
> >
> >Thank you for your help.
> >
> >Jim
>