The Future of 3D Printing Materials

Status
Not open for further replies.

dogie

Honorable
Oct 29, 2012
1
0
10,510
0
Really, really bad article. This information is literally years old, and there is a world outside of material extrusion full of 100s of materials.
 

MiguelKendrick

Honorable
Jan 20, 2014
1
0
10,510
0
"3D printing in general—still has one big limitation: each object can only be printed out of one of those materials."That's right. 3D printing materials has limitations that we should consider. Take note also of the importance of filament's tolerance. Make sure your filament is top of the line and find a good filament supplier. Quality filaments I found to date were from 3D2PRINT. I purchased 3mm and 1.75mm ABS and PLA (gold, silver and glow). You can shop more of it here: http://www.3d2print.net/shop/filament/
 
Status
Not open for further replies.
Thread starter Similar threads Forum Replies Date
D Streaming Video & TVs 1
C Streaming Video & TVs 5
D Streaming Video & TVs 1
O Streaming Video & TVs 1
Marshall Honorof Streaming Video & TVs 1
G Streaming Video & TVs 0
G Streaming Video & TVs 0
G Streaming Video & TVs 0
G Streaming Video & TVs 5
G Streaming Video & TVs 0
G Streaming Video & TVs 0
G Streaming Video & TVs 8
G Streaming Video & TVs 6
G Streaming Video & TVs 0
G Streaming Video & TVs 5
G Streaming Video & TVs 6
NduPlessis Streaming Video & TVs 12
G Streaming Video & TVs 74
G Streaming Video & TVs 17
G Streaming Video & TVs 0

ASK THE COMMUNITY