Transferring a mix from ADAT to Pro Tools. pops and clicks..

[Guest]

Archived from groups: rec.audio.pro (More info?)

the ADAT session was recorded at 16/48, so i set the Digi Sync IO to
16/48, and connected it to the ADATs via wordclock. i am transferring
this into Pro Tools with the HD 192.

if i got the sample rates the same, and they're sync'ed with word
clock, what am i missing? theres pops everywhere, and I can seem to
find out what I am missing. and the pops arent in the data itself,
because they are never in the same place twice.

thanks for your help.

 

[Guest]

Archived from groups: rec.audio.pro (More info?)

TDM darill wrote:

>the ADAT session was recorded at 16/48, so i set the Digi Sync IO to
>16/48, and connected it to the ADATs via wordclock. i am transferring
>this into Pro Tools with the HD 192.
>
>if i got the sample rates the same, and they're sync'ed with word
>clock, what am i missing? theres pops everywhere, and I can seem to
>find out what I am missing. and the pops arent in the data itself,
>because they are never in the same place twice.
>
>thanks for your help.

I've done it syncing with optical(ADAT) in the 001 window(setup or hardware
whatever that is) and it worked fine - no word clock.




Me at:
http/www.soundclick.com/bands/5/andymostmusic.htm

 

[erick]

Archived from groups: rec.audio.pro (More info?)

TDM wrote:
> the ADAT session was recorded at 16/48, so i set the Digi Sync IO to
> 16/48, and connected it to the ADATs via wordclock. i am
> transferring this into Pro Tools with the HD 192.

Are you using a BRC, if so, do you have it set to word clock slave? Do
you have the Sync I/O set to Master?


--
Eric

Practice Your Mixing Skills
Multi-Track Masters on CD-ROM
www.Raw-Tracks.com