Zenith DVT412 connection to newer tv

rbigcal

Prominent
Nov 4, 2017
1
0
510
0
I have a Zenith model DVT412 home theater system that came in a rv and cannot figure out how to get sound from the tv to go through the surround sound speakers. Not even sure that its capable of doing it. The tv is a vizio hd . The surround system is connected with rca cables to Y, Pb and Pr. There is also a rca jack on the back of the surround receiver that is marked monitor out and according to the manual it is supposed to connect to video input on back of tv. There is no video input on tv, it has a tv audio out that is a 3.5mm.The only other jacks on tv are Left and Right (red and white) rca jacks.
 
The only input on the Zenith is analog stereo audio. Without knowing the make and model of the TV I can't give you an exact answer.
If the TV does have a 3.5mm stereo headphone jack then that should connect to the aux input on the Zenith.
Most TVs have RCA analog audio inputs but not outputs.
Most TVs have optical audio output. You would need an optical to analog converter to connect that to the Zenith.
If the TV has component video inputs then it may be a shared composite input. Check the TV manual on how to configure it for composite and what RCA jack to connect the yellow video out of the Zenith to.
 
The only input on the Zenith is analog stereo audio. Without knowing the make and model of the TV I can't give you an exact answer.
If the TV does have a 3.5mm stereo headphone jack then that should connect to the aux input on the Zenith.
Most TVs have RCA analog audio inputs but not outputs.
Most TVs have optical audio output. You would need an optical to analog converter to connect that to the Zenith.
If the TV has component video inputs then it may be a shared composite input. Check the TV manual on how to configure it for composite and what RCA jack to connect the yellow video out of the Zenith to.
 
Thread starter Similar threads Forum Replies Date
I Audio 0
SirMisAlot Audio 1
R Audio 0
P Audio 1
P Audio 0
E Audio 1
F Audio 2
F Audio 2
K Audio 1
J Audio 0
C Audio 1
Z Audio 1
M Audio 1
E Audio 1
Lost-in-Place Audio 1
R Audio 6
Mark Spoonauer Audio 6
L Audio 2
R Audio 1
B Audio 5
Similar threads
Question connect vintage -one RCA each, speakers to a modern amplifier?
Question speaker working no negative connection to stereo??
Question How to connect 1/8" stereo output to two mono RCA inputs
Question Is it possible to connect a 5.1 home theatre soundbar surround sound system to a projector via an a/v receiver?
Question connect bluetooth transmitter to RCA spkr out a/v
Solved! Connecting Haier TV to Altec Lansing amplifier.
Question logitech z313 and external subwoofer connection
Question How to wirelessly connect projector with Chromecast to soundbar?
Question Single 5:1 / Mic jack on z790 Gaming X AX motherboard. Connect to Z5300 Surround Speakers which have a greren/yellow/black 3.5mm cable
Question Bluetooth transmitter paired and connected, no sound in Bluetooth earpiece.
Question How to properly connect a headset to a DAP
Question Why can't I connect two audio sources via a (1 female/2 male) 3.5mm Y-connector to one stereo, assuming only one active source at a time?
Question I need some help with connections
Question Connecting 3.5mm output (projector) to digital input (soundbar). Please Help!
Question How do I (or is to possible to) connect my smart tv to my old audio only stereo receiver?
Question Best way to connect a Sony BRAVIA X900F to JBL SCS136 surround sound system
Alexa Big Mouth Billy Bass Is the Zenith of Technological Achievement
Zenith receiver to samsung
how to connect sony sound bar to zenith plasma tv
Connecting Zenith plasma TV to a soundbar

ASK THE COMMUNITY

TRENDING THREADS